You've Selected

Narrow Results

Accessories

Toradex offers off-the-shelf accessories that can be directly used in end-products. For few of the accessories, the design files including assembly drawings, schematics and Altium projects are available. These design files enable easy design of customized accessories as per application-specific requirements.

Results: 1-15 of 15 products.
  View  
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis T30
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • x16 (x4 mode) PCI Express slot
  • Push button for entering Apalis T30 recovery mode
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
  • 1x Generic Header, 1x USB 2.0
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • Resolution: 800x480px
  • 18-bit RGB + TCON
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable to connect it with a Carrier Board
  • No special drivers required
  • Operating temperature: -20° to +70° C
  • Resolution: 800x480px
  • 18-bit RGB + TCON
  • 40 pin and 10 pin FFC cable to connect it with a Carrier Board
  • Atmel touch driver
  • Operating temperature: -20° to +70° C
  • EDT 5.7" Display with 640x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -10° to 60° C
  • EDT 7" Display with 800x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -20° to 70° C
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps, 802.11b/g/h-compatible
  • 1x1 MIMO technology improves eective throughput and range over existing 802.11 b/g products
  • Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps, 802.11b/g/h-compatible
  • 1x1 SISO technology improves effective throughput and range over existing 802.11 b/g products
  • 802.11e-compatible bursting and I standards
  • BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
  • WEP, TKIP, AES, WPA and WPA2 hardware encryption schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Uses Analog Devices, ADV7280 video decoder
  • Analogue Camera Input : 4 multiplexed video input channels, supporting NTSC / PAL / SECAM composite video signals
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
  • Cables: USB, Ethernet, RS232, Jumper Wires
  • Adapters: DVI to VGA, HDMI to DVI, USB to RS232, USB Micro-A to A (USB Micro-AB receptacle to Type A), RS232 Header to D-Sub, Iris Power-adapter
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board
  • Adapter to connect Parallel Capacitive Touch Displays to Toradex Carrier Boards
  • MIPI-CSI, Auto-focus 5MP OV5640 camera sensor module
  • Connects directly to the MIPI-CSI FFC connector on the Apalis Ixora carrier boards
  • No external power supply required
  • 24 way 0.5mm pitch FFC cable included in scope of delivery