You've Selected

Narrow Results

Accessories

Toradex offers off-the-shelf accessories that can be directly used in end-products. For few of the accessories, the design files including assembly drawings, schematics and Altium projects are available. These design files enable easy design of customized accessories as per application-specific requirements.

Results: 1-13 of 13 products.
  View  
  • Proven reliability in many vibration and shock tests
  • Colibri carrier boards provide mounting holes (except for Viola)
  • 1 Fastener bag contains 100 Fasteners
  • Resolution: 800x480px
  • 18-bit RGB + TCON
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable to connect it with a Carrier Board
  • No special drivers required
  • Operating temperature: -20° to +70° C
  • Resolution: 800x480px
  • 18-bit RGB + TCON
  • 40 pin and 10 pin FFC cable to connect it with a Carrier Board
  • Atmel touch driver
  • Operating temperature: -20° to +70° C
  • EDT 5.7" Display with 640x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -10° to 60° C
  • EDT 7" Display with 800x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -20° to 70° C
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps, 802.11b/g/h-compatible
  • 1x1 MIMO technology improves eective throughput and range over existing 802.11 b/g products
  • Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Compatible with Colibri T20, Colibri T30 and Colibri iMX6
  • Provides easy-to-use interface to connect a full HD monitor to the Colibri Module using HDMI interface
  • No external power supply required
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps, 802.11b/g/h-compatible
  • 1x1 SISO technology improves effective throughput and range over existing 802.11 b/g products
  • 802.11e-compatible bursting and I standards
  • BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
  • WEP, TKIP, AES, WPA and WPA2 hardware encryption schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Uses Analog Devices, ADV7280 video decoder
  • Analogue Camera Input : 4 multiplexed video input channels, supporting NTSC / PAL / SECAM composite video signals
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
  • Cables: USB, Ethernet, RS232, Jumper Wires
  • Adapters: DVI to VGA, HDMI to DVI, USB to RS232, USB Micro-A to A (USB Micro-AB receptacle to Type A), RS232 Header to D-Sub, Iris Power-adapter
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board
  • Adapter to connect Parallel Capacitive Touch Displays to Toradex Carrier Boards
  • 18-bit RGB to LVDS
  • 1mm pitch
  • Compatible with various Toradex carrier boards
  • 18-bit RGB to LVDS
  • 1.25mm pitch
  • Compatible with various Toradex carrier boards