Resistive Touch Display

7.0” WVGA 800 x 3 (RGB) x 480 High Brightness Resistive Touch TFT Module. This display is directly compatible with the complete Colibri SoM family, as well as the Apalis T30 and the Apalis iMX6 Modules

Resistive Touch Display

Highlights

Description

7.0” WVGA 800 x 3 (RGB) x 480 High Brightness Resistive Touch TFT Module for the use with Toradex Apalis and Colibri modules.

  • 7" WVGA, a-Si TN TFT Display type
  • 18-bit RGB + TCON
  • 4-Wire Resistive Touch
  • 40 pin FFC data cable to connect it with a Carrier Board
  • No special drivers required

Out-of-the-Box Experience with Toradex Carrier Boards

This display is directly compatible with the complete Colibri SoM family, as well as the Apalis T30, Apalis iMX6 and Apalis iMX8X. It works with the following Toradex Carrier Boards out-of-the-box:

Scope of delivery

  • 7” Resistive Touch Display Panel 
  • 40 Pins 0.5mm FFC Ribbon Cable
 

Features

FRONT
BACK
 

Resistive Touch Display 7" Parallel

PN: 1213
  •  
Buy Now
Accessory Feature 3
Accessory Feature 4
Accessory Feature 5
Touch: 4-Wire Resistive Touch
40 pin FFC cable (250mm) to connect it with a Carrier Board
No special drivers required
Supply Voltage
Size
Temperature
3.3V
164.9 x 100.0 x 13.0 mm
-20° to 70° C
Intended Use
For Evaluation/Development

Carrier Boards

The carrier board provides the necessary signal and power levels to the CoM. It also houses the application-specific connectivity and multimedia interfaces, such as USB, Ethernet, UART and HDMI.

Learn more about SBCs and Carrier Boards

Ixora Carrier Board

Ixora Datasheet

Apalis Evaluation Board

Datasheet

Colibri Evaluation Board

Datasheet

Iris Carrier Board

Datasheet

Viola Carrier Board

Viola Datasheet
Supported Modules
USB 3.0
USB 2.0
Ethernet
PCIe
External Bus
I2C
SPI
UART
IrDA
PWM
GPIO
Analog Input
Serial ATA
SDIO/SD/MMC
CAN
JTAG
Entire Apalis Family
2x Host
1x Host / 1x OTG
Gigabit
1x (Mini PCIe)
2x
1x
3x RS232
4x
up to 40
4x
1x mSATA
1x 4 Bit (microSD)
2x
Entire Apalis Family
1x Host, 1x OTG
4x Host
Gigabit
2x 1 slot / 1x (Mini PCIe)
3x
2x
2x RS232, 1x RS422/485
1x
4x
up to 135
4x
1x / 1x mSATA (shared)
2x 4 Bit
2x
Yes
Entire Colibri Family
4x Host, 1x OTG/Client
10/100 Mbit
Up to 32 Bit
4x
4x
2x RS232, 1x RS422/485
1x
4x
up to 158
4x
1x 4 Bit
1x
Yes
Entire Colibri Family
1x Host / 1x OTG
10/100 Mbit
1x
1x
3x RS232
4x
up to 26
4x
1x 4 Bit (microSD)
Entire Colibri Family
2x Host, 1x Client (Shared)
10/100 Mbit
1x
1x
3x /
3x TTL
4x
up to 35
4x
1x 4 Bit (microSD)
1x (Available with Colibri VFxx and iMX)
Entire Colibri Family
2x Host, 1x Client (Shared)
10/100 Mbit
1x
1x
2x TTL, 1x USB-UART
4x
up to 39
4x
1x 4 Bit (SD/MMC)
1x (Available with Colibri VFxx and iMX)
Yes
Switches
LEDs
2x
8x
8x
6x
4x
up to 3x
LVDS
HDMI
Digital Audio
S/PDIF In / Out
VGA
RGB
Capacitive Touch Interface
Resistive Touch
Camera Parallel Interface
Camera Serial Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Dual Channel
1x
1x / 1x
1x (24 Bit)
Yes
4/5-wire
1x 10 Bit
1x Quad Lane MIPI CSI-2
1x (Stereo)
1x (Mono)
1x (Stereo)
1x Dual Channel
1x (Through DVI-I connector)
7.1 Channel HD Audio Codec (incl. analogue connectors)
1x (Out also on TOSLINK)
1x
1x (24 Bit)
4/5-wire
1x 8/10/12 Bit
On Mezzanine
1x (Stereo)
1x (Mono)
1x (Stereo)
1x Single Channel
1x (Through DVI-I connector)
1x
1x (18 Bit/24 Bit)
Adapter required
4/5-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
1x Dual Channel
1x (Through DVI-I connector)
1x (Through DVI-I connector)
1x (18 bit)
Yes
4/5-wire
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (18 bit)
Adapter required
4-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (Shared with RGB)
1x (18 bit)
Yes
4-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Included Accessory
Altium CAE Data Freely Available
1x
Yes
Yes
1x
1x
Yes
1x
1x
Mating Power Plug (for X33)
24-way FFC 100mm (for X6)
Yes
1x
Mating Power Plug (for X17)
24-way FFC 35mm (for X4)
Yes
1x (*Not Assembled) /
1x
Yes
Arduino UNO and Raspberry Pi B+
1x
1x
Yes
Supply Voltage
On-Board Power Supplies
Size
Temperature
7-27V DC
5V 6A
3.3V 8A
125 x 90 mm
-20° to 85° C
7-27V DC
5V 5A
3.3V 5A
250 x 250 mm
7-27V DC
5V 5A
3.3V 5A
200 x 200 mm
6-27V DC
5V 5A
3.3V 5A
100 x 72 mm
-20° to 85° C
5V DC +/- 5%
5V (External)
3.3V 3A
74 x 74 mm
-40° to 85° C
5V DC +/- 5%
3.3V 3A
100 x 80 mm
-25° to 85° C
Intended Use
Minimum Product Commitment
For End Products
2034+
For Evaluation/Development
For End Products
2030
For End Products
2034+
For Evaluation/Development

Buy Now

1 Modules, 7 Carrier Boards
V1.0B
Resistive Touch Display 7
PN: 12131001

Resistive Touch Displays it for Apalis & Colibri modules

Touch: 4-Wire Resistive Touch. 40 pin FFC cable (250mm) to connect it with a Carrier Board. No special drivers required. -20° to 70° C Temp, Range. Size: 164.9 x 100.0 x 13.0 mm.

  • Quantity
    >0
  • Unit Price
    $99.00
Intended Use: For Evaluation/Development
V1.3A
Ixora Carrier Board V1.3A
PN: 01331300
Volume Production

Small form-factor Apalis Arm Computer Module family Carrier Board

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host/ 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x/ 1x S/PDIF In/ Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 6A, 3.3V 8A On-Board Power Supplies, Size: 125 x 90 mm

  • Quantity
    1-99
    >99
  • Unit Price
    $149.90
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For End Products
V1.1Z
Apalis Evaluation Board V1.1Z
PN: 01151125
Sample Production

Connectivity: USB 3.0: 1x Host, 1x OTG, USB 2.0: 4x Host, Gigabit Ethernet, 3x I2C, 2x SPI, 4x PWM, 4x ADC, 2x CAN, 8x Switches, 8x LEDs, up to 135 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x (Out also on TOSLINK) S/PDIF In/ Out, 1x 8/10/12 Bit Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 250 x 250 mm

  • Quantity
    >0
  • Unit Price
    $349.80
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For Evaluation/Development
V3.2B
Colibri Evaluation Board
PN: 01013201
Sample Production

Connectivity: USB 2.0: 4x Host, 1x OTG/Client, 10/100 Mbit Ethernet, 4x I2C, 4x SPI, 4x PWM, 4x ADC, 1x CAN, 6x Switches, 4x LEDs, up to 158 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 200 x 200 mm

  • Quantity
    >0
  • Unit Price
    $239.80
Intended Use: For Evaluation/Development
V2.0A
Last Time Buy

Small form-factor Pico-ITX Colibri Arm Computer Module family Carrier Board

Connectivity: USB 2.0: 1x Host/ 1x OTG, 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, up to 26 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 4/5-wire Resistive Touch

Physical: 6-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 100 x 72 mm

Intended Use: For End Products
V1.2B
Viola Carrier Board
PN: 01371201
Volume Production

Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 35 GPIOs

Multimedia: 4-wire Resistive Touch

Physical: 5V DC +/- 5% Supply Voltage, 5V (External), 3.3V 3A On-Board Power Supplies, Size: 74 x 74 mm

  • Quantity
    1-99
    >99
  • Unit Price
    $34.40
Intended Use: For End Products
V1.2B Plus
Viola Plus Carrier Board
PN: 01421201
Volume Production

Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 35 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4-wire Resistive Touch

Physical: 5V DC +/- 5% Supply Voltage, 5V (External), 3.3V 3A On-Board Power Supplies, Size: 74 x 74 mm

  • Quantity
    1-99
    >99
  • Unit Price
    $41.25
Intended Use: For End Products
V1.1B
Aster Carrier Board
PN: 01431101
Sample Production

Small form-factor with header compatible with Arduino Uno and Raspberry Pi (RPi) maker boards

Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 3x LEDs, up to 39 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4-wire Resistive Touch

Physical: 5V DC +/- 5% Supply Voltage, 3.3V 3A On-Board Power Supplies, Size: 100 x 80 mm

  • Quantity
    >0
  • Unit Price
    $74.80
Intended Use: For Evaluation/Development
Have a Question?