The messages “Power-on latency exceeded, new value…” and “Power-off latency exceeded, new value…” appears on terminal.
dmesg information:
root@colibri-imx6:~# dmesg | grep latency
[ 2.829818] PU: Power-on latency exceeded, new value 2187000 ns
[ 13.075338] PU: Power-on latency exceeded, new value 3292334 ns
[ 17.684989] PU: Power-off latency exceeded, new value 25334 ns
[ 28.323905] PU: Power-on latency exceeded, new value 3738000 ns
[ 59.744979] PU: Power-off latency exceeded, new value 25667 ns
My environment is:
Linux Based on V2.6 adding QT5 Linux v2.6+QT5 running on Toradex dev board with Colibri imx6.
Some ideas to avoid this messages?.