Capacitive Touch Display

This display is directly compatible with the complete Colibri SoM family, as well as the Apalis T30 and the Apalis iMX6 Modules. It works with the Ixora and Aster Carrier Boards out-of-the-box.

Capacitive Touch Display

Highlights

Description

7.0” WVGA 800 x 3 (RGB) x 480 High Brightness Capacitive Touch TFT Module for the use with Toradex Apalis and Colibri modules.

  • 7" WVGA, a-Si TFT Display
  • 18-bit RGB + TCON
  • 40 pin and 10 pin FFC cable to connect it with a Carrier Board
  • Atmel touch driver

Out-of-the-Box Experience with Toradex Carrier Boards

This display is directly compatible with the complete Colibri SoM family, as well as the Apalis T30, Apalis iMX6 and Apalis iMX8X. It works with the following Toradex Carrier Boards out-of-the-box:

Using the Capacitive Touch Adapter, the following Boards are compatible as well:

Scope of delivery

  • 7” Capacitive Touch Display Panel 
  • 10 Pins 0.5mm FFC Ribbon Cable
  • 40 Pins 0.5mm FFC Ribbon Cable

Features

Vorderseite
Rückseite
Ab Lager verfügbar

Capacitive Touch Display 7" Parallel

  •  
Kaufen
Supply Voltage
Size
Temperature
3.3V
173 x 112 x 13 mm
-20° to +70° C
Accessory Feature 4
Accessory Feature 5
40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
Atmel touch driver
Pricing
Minimum Product Commitment
1 : 99,70 $

Trägerboards

Die Carrier Boards stellen dem Computermodul die notwendigen Signale sowie die Stromversorgung zur Verfügung. Weiter bieten sie die anwendungsspezifischen Verbindungsmöglichkeiten sowie Multimedia Interfaces, wie zum Beispiel USB, Ethernet, UART und HDMI.

Ixora Carrier Board

Datenblatt

Aster Carrier Board

Datenblatt
Supported Modules
USB 3.0
USB 2.0
Ethernet
PCIe
I2C
SPI
UART
PWM
GPIO
Analog Input
Serial ATA
SDIO/SD/MMC
CAN
JTAG
Entire Apalis Family
2x Host
1x Host / 1x OTG
Gigabit
1x Mini PCIe
2x
1x
3x RS232
4x
up to 40
4x
1x mSATA
1x 4 Bit (microSD)
2x
Entire Colibri Family
2x Host, 1x Client (Shared) /
2x (High Speed)
1x Device (High Speed)
10/100 Mbit
1x
1x
2x TTL, 1x USB-UART /
2x TTL, 1x USB
4x
up to 39
4x
1x 4 Bit (SD/MMC) /
1x 4 Bit (Full Size)
1x (Available with Colibri VFxx and iMX)
Yes
LEDs
2x
up to 3x
LVDS
S/PDIF In / Out
HDMI
VGA
RGB
Capacitive Touch
Resistive Touch
Camera Parallel Interface
Camera Serial Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Dual Channel
1x / 1x
1x
1x (24 Bit)
Yes
4/5-wire
1x 10 Bit
1x Quad Lane MIPI CSI-2
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (Shared with RGB)
1x (18 bit) /
4-wire /
1x
1x /
1x (Stereo)
1x (Mono)
1x (Stereo)
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Altium CAE Data Freely Available
1x
Yes
Arduino UNO and Raspberry Pi B+ /
1x
1x /
Yes
Supply Voltage
On-Board Power Supplies
Size
Temperature
Minimum Product Commitment
7-27V DC
5V 5A
3.3V 5A /
5V 6A
3.3V 8A
125 x 90 mm
0° to +70° C
-20° to +85° C(1) /
-20° to +85° C
2020 /
2030
5V DC +/- 5% /
5V DC
3.3V 3A
100 x 80 mm
-25° to +85° C

(1) This temperature range applies excluding the Ethernet connector

Zubehör

Toradex bietet einsatzbereite Accessoires an, die direkt in Endprodukten verwendet werden können. Für einige der Accessoires stehen zudem die Design Files inklusive Montageanleitungen, Schema- sowie Altium Projektdateien zur Verfügung.

Kaufen

1 Zubehör
V1.0B
Capacitive Touch Display 7
PN: 12111001

Capacitive Touch Displays for Apalis & Colibri modules

40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board, Atmel touch driver, -20° to +70° C Temp, Range. Size: 173 x 112 x 13 mm.

  • Menge
    >0
  • Stückpreis
    99,70 $

Ab Lager verfügbar

V1.1A
Ixora Carrier Board 1.1A
PN: 01331100
Produktänderungsbenachrichtigung

Small form-factor Apalis Arm Computer Module family Carrier Board

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host / 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x / 1x S/PDIF In / Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 125 x 90 mm

  • Menge
    1-99
    100-249
    250-499
    500-999
    >999
  • Stückpreis
    111,90 $
    107,40 $
    100,70 $
    96,20 $

Ab Lager verfügbar

V1.2A
Ixora Carrier Board V1.2A
PN: 01331200

Small form-factor Apalis Arm Computer Module family Carrier Board

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host / 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x / 1x S/PDIF In / Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 6A, 3.3V 8A On-Board Power Supplies, Size: 125 x 90 mm

  • Menge
    1-99
    100-249
    250-499
    500-999
    >999
  • Stückpreis
    111,90 $
    107,40 $
    100,70 $
    96,20 $

Ab Lager verfügbar

V1.1B
Aster Carrier Board
PN: 01431101
Testprodukt

Small form-factor with header compatible with Arduino Uno and Raspberry Pi (RPi) maker boards

Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 3x LEDs, up to 39 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4-wire Resistive Touch

Physical: 5V DC +/- 5% Supply Voltage, 3.3V 3A On-Board Power Supplies, Size: 100 x 80 mm

  • Menge
    >0
  • Stückpreis
    61,50 $

Ab Lager verfügbar

V1.0A
Capacitive Touch Adapter
PN: 01511000

Capacitive Touch Adapter for the new Parallel Capacitive Touch Displays. 

-30° to +85° C Temp, Range. Size: 20 x 20 x 8.4 mm.

  • Menge
    >0
  • Stückpreis
    19,00 $

Ab Lager verfügbar

Have a Question?