Sie wählten

Ergebnisse filtern

Accessoires

Toradex verkauft einsatzbereite Accessoires, welche direkt in Endprodukten verwendet werden können. Für einige der Accessoires stehen die Design Files, inklusive der Assembly Drawings, Schematics und Altium Projekte zur Verfügung. Diese Design Files ermöglichen eine einfache Herstellung von spezifischen und angepassten Accessoires für anwendungsspezifische Anforderungen.

Ergebnisse 1-15 von 21 Produkten
  Ansicht  
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis T30
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX8QM
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • 1x DSI and 3x MIPI CSI connectors
  • 1x Tactile switch to enter Apalis TK1 recovery mode
  • 1x Tactile switch to reset Apalis TK1 module
  • 1 Fastener bag contains 100 Fasteners
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable to connect it with a Carrier Board
  • No special drivers required
  • Operating temperature: -20° to +70° C
  • 40 pin and 10 pin FFC cable to connect it with a Carrier Board
  • Atmel touch driver
  • Operating temperature: -20° to +70° C
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -10° to 60° C
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -20° to 70° C
  • Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • No external power supply required
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board