Heatsink for Apalis T30 module
Compatible with Apalis T30, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additional threaded holes available for attaching fan to the carrier board.
NVIDIA Tegra 3 Computer on Module - Apalis T30
| Apalis T30 Datasheet |
| Block Diagram |
| Pinout Designer Tool |
| Technical Details |
Powered by NVIDIA: Tegra 3 Quad Core Prozessor
Das Apalis T30 ist ein kleiner Computer on Module, welcher auf einem NVIDIA© Tegra 3 SoC basiert. Die Cortex A9 Quad Core CPU bietet eine Betriebsfrequenz von bis zu 1.4GHz. Das Modul bietet High Performance und erweiterte Grafikfunktionen bei einem optimalen Stromverbrauch.
Die integrierte NVIDIA Grafik ermöglicht ein visuell reiches, reibungsloses und schnelles User Interface.
Beeindruckende Grafik Performance für anspruchsvolle Anwendungen
Das Apalis T30 Modul ist ausgerichtet auf eine grosse Anzahl von möglichen Anwendungen wie zum Beispiel digitale Signalverarbeitung, Medizinische Geräte, Navigation, HMIs, Luftfahrtelektronik, Entertainment Systeme, Robotertechnik, Gaming uvm.
Der Standard offeriert eine breite Palette an Interfaces welche von einfachen, wie zum Beispiel GPIOs und Industriestandarte I2C, SPI, UART bis zu modernen wie zum Beispiel LVDS, HDMI, Digital Audia, etc. reicht.
Robuste und Pin-Kompatible Apalisfamilie
Basierend auf dem wertvollen Feedback unserer Kunden und der weitreichenden Branchenerfahrung unserer Ingenieure bringt Apalis zahlreiche neue Technologien auf den Markt. Direct Breakout™ stellt eine maßgebliche Vereinfachung für das Routing von Hochgeschwindigkeitssignalen auf dem Baseboard sicher. MXM SnapLock™ bietet einen einzigartigen Anschlussmechanismus für die Befestigung des Moduls. Apalis unterstützt außerdem fertige Kühllösungen für die anspruchsvollsten Anwendungen.
Neuste Informationen über Apalis T30
Sie finden die neusten Informationen über die Apalis T30 Entwicklungsmuster im Toradex Developer Center
Toradex offers free support and maintenance for Windows Embedded Compact and Embedded Linux on the NVIDIA Tegra 3 processor based Colibri and Apalis T30 SoMs. This allows system designers to focus the application only instead of focusing on the OS and low-level device drivers. Other OS such as Android are supported by our partners.
Embedded Linux
Toradex carries out in-house development and maintenance of a Yocto project-compatible production-quality Embedded Linux BSP. Our extensive documentation and support makes sure your product reaches market in time. Full source code and Toradex developments are up-streamed into mainline.
For general information about the advantages and features, check our Embedded Linux page.
Windows Embedded Compact
Windows Embedded Compact 7 and 2013 are supported on both Colibri and Apalis T30. The development and maintenance is carried out in-house by Toradex. WEC allows you to use Microsoft .Net Compact Framework and Visual Studio. Microsoft is providing support and updates for Embedded Compact 2013 until year 2028.
The price of the Colibri and Apalis T30 modules includes a runtime license for Windows Embedded Compact 2013 Entry (C13Entry) which is backward compatible to earlier Windows CE versions.
For general information about advantages and features, check our Windows Embedded Compact page.
| ×Ixora Carrier Board | ×Apalis Evaluation Board | ×Apalis Partner Carrier Boards | |
 |  |  | |
| Datasheet | Datasheet | ||
| detail... | detail... | detail... | |
| Connectivity | |||
| Supported Modules | Entire Apalis Family | Entire Apalis Family | Entire Apalis Family |
| USB 3.0 | 2x Host | 1x Host, 1x OTG | Up to 2x (1x OTG) |
| USB 2.0 | 1x Host / 1x OTG | 4x Host | up to 4x Host |
| Ethernet | Gigabit | Gigabit | up to 11x 10/100/1000 MBit |
| PCIe | 1x Mini PCIe | 2x 1 slot / 1x Mini PCIe | up to 2x miniPCIe |
| I2C | 2x | 3x | up to 3x I2C |
| SPI | 1x | 2x | up to 2x SPI |
| UART | 3x RS232 | 2x RS232, 1x RS422/485 | up to 8 RS-232/422/485 |
| IrDA | — | 1x | — |
| PWM | 4x | 4x | up to 4x PWM |
| GPIO | up to 40 | up to 135 | up to 16x |
| Analog Input | 4x | 4x | up to 4x Analog Input |
| Serial ATA | 1x mSATA | 1x / 1x mSATA (shared) | up to 1x mSATA |
| SDIO/SD/MMC | 1x 4 Bit (microSD) | 1x 8 Bit, 1x 4 Bit | up to 1x SD/MMC 4-Bit |
| CAN | 2x | 2x | up to 2x CAN |
| Input / Output | |||
| Switches | — | 8x | — |
| LEDs | 2x | 8x | — |
| Multimedia | |||
| LVDS | 1x Dual Channel | 1x Dual Channel | 1x Dual Channel |
| Digital Audio | — | 7.1 Channel HD Audio Codec (incl. analogue connectors) | — |
| S/PDIF In / Out | 1x / 1x | 1x (Out also on TOSLINK) | 1x |
| HDMI | 1x | 1x (Through DVI-I connector) | 1x |
| VGA | — | 1x | — |
| RGB | 1x (24 Bit) | 1x (24 Bit) | 1x (24 Bit) |
| Capacitive Touch | Yes | — | — |
| Resistive Touch | 4/5-wire | 4/5-wire | up to 4/5-wire |
| Camera Parallel Interface | 1x 10 Bit | 1x 8/10/12 Bit | — |
| Camera Serial Interface | 1x Quad Lane MIPI CSI-2 | On Mezzanine | up to 3 MIPI CSI-2 |
| Analog Audio Line in | 1x (Stereo) | 1x (Stereo) | 1x (Stereo) |
| Analog Audio Mic in | 1x (Mono) | 1x (Mono) | 1x (Mono) |
| Analog Audio Headphone out | 1x (Stereo) | 1x (Stereo) | 1x (Stereo) |
| Other | |||
| Type Specific Board Connector | — | Yes | — |
| USB-to-RS232 Transceiver | — | 1x | — |
| RTC on Board | 1x | 1x | — |
| Altium CAE Data Freely Available | Yes | Yes | — |
| JTAG | — | Yes | — |
| Physical | |||
| Supply Voltage | 7-27V DC | 7-27V DC | +9VDC to +36VDC |
| On-Board Power Supplies | 5V 5A 3.3V 5A | 5V 5A 3.3V 5A | — |
| Size | 125 x 90 mm | 250 x 250 mm | 102 x 146 - Size (in mm) |
| Temperature | 0° to +70° C -20° to +85° C(2) | — | -40°C to +85°C |
| Minimum Product Commitment(1) | 2030 | — | — |
- Compatible with Apalis T30
- Easily mounted to the Apalis Carrier Boards by means of 4 screws
- Additional threaded holes available for attaching fan to the carrier board
- CSI and DSI interfaces on one connector
- Push button for Apalis T30 reset
- Touch: 4-Wire Resistive Touch
- 40 pin FFC cable to connect it with a Carrier Board
- No special drivers required
- Operating temperature: -20° to +70° C
- 40 pin and 10 pin FFC cable to connect it with a Carrier Board
- Atmel touch driver
- Operating temperature: -20° to +70° C
- Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible)
- BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
- WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
- Can be setup as a ad-hoc network via peer to peer communications
- Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
- No external power supply required
- Compatible with Colibri Evaluation Board and Apalis Evaluation Board
- Power Adapter: 12VDC 30W with international plugs
- Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board
- No external power supply required
- 24 way 0.5mm pitch FFC cable included in scope of delivery
5 Module, 2 Trägerboards, 8 Zubehör
PN: 00251101
Apalis T30 2GB | V1.1B
NVIDIA® Tegra™ 3, 4x Arm Cortex™-A9, Up to 1.4 GHz, 2GB DDR3L (32 Bit), 8GB eMMC, Gigabit with IEEE 1588 Ethernet, 0° to 70° C Temp. Range, Availability until 2025
|
|
low stock
Derzeit niedriger Lagerbestand. Demnächst mehr verfügbar. Bitte kontaktieren Sie uns für Details.
PN: 00251100
Apalis T30 2GB | V1.1A
NVIDIA® Tegra™ 3, 1x Arm Cortex™-A9, Up to 1.4 GHz, 2GB DDR3L (32 Bit), 8GB eMMC (8 Bit), 10/100/1000 Mbit with IEEE 1588 Ethernet, 0° to 70° C Temp. Range, Availability until 2025
|
|
low stock
Derzeit niedriger Lagerbestand. Demnächst mehr verfügbar. Bitte kontaktieren Sie uns für Details.
PN: 00261100
Apalis T30 1GB | V1.1A
NVIDIA® Tegra™ 3, 4x Arm Cortex™-A9, Up to 1.4 GHz, 1GB DDR3L (32 Bit), 4GB eMMC, Gigabit with IEEE 1588 Ethernet, 0° to 70° C Temp. Range, Availability until 2025
|
|
in stock
PN: 00261101
Apalis T30 1GB | V1.1B
NVIDIA® Tegra™ 3, Arm Cortex™-A9, Up to 1.4 GHz, 1GB DDR3L (32 Bit), 4GB eMMC (8 Bit), Gigabit with IEEE 1588 Ethernet, 0° to 70° C Temp. Range, Availability until 2025
|
|
low stock
Derzeit niedriger Lagerbestand. Demnächst mehr verfügbar. Bitte kontaktieren Sie uns für Details.
PN: 00311101
Apalis T30 1GB IT | V1.1B
NVIDIA® Tegra™ 3, 4x Arm Cortex™-A9, Up to 1.4 GHz, 1GB DDR3L (32 Bit), 4GB eMMC, Gigabit with IEEE 1588 Ethernet, -40° to +85° C Temp. Range, Availability until 2025
|
|
in stock
PN: 01331100
Ixora Carrier Board | V1.1A
Small form-factor Apalis Arm Computer Module family Carrier Board
Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host / 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x / 1x S/PDIF In / Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 125 x 90 mm
|
|
in stock
PN: 01151100
Apalis Evaluation Board | V1.1A
Connectivity: USB 3.0: 1x Host, 1x OTG, USB 2.0: 4x Host, Gigabit Ethernet, 3x I2C, 2x SPI, 4x PWM, 4x ADC, 2x CAN, 8x Switches, 8x LEDs, up to 135 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x (Out also on TOSLINK) S/PDIF In / Out, 1x 8/10/12 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 250 x 250 mm
|
|
in stock
PN: 23061000
Apalis Heatsink Type 2 | V1.0A
Heatsink for Apalis T30 module
Compatible with Apalis T30, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additional threaded holes available for attaching fan to the carrier board.
|
|
in stock
PN: 01161100
Apalis T30 Mezzanine | V1.1A
Mezzanine board for Apalis T30 module
CSI and DSI interfaces on one connector, Push button for Apalis T30 reset.
|
|
in stock
PN: 12131000
Resistive Touch Displays it for Apalis & Colibri modules
Touch: 4-Wire Resistive Touch, 40 pin FFC cable to connect it with a Carrier Board, No special drivers required, Operating temperature: -20° to +70° C, Range. Size: 164.9 (W) x 100.0 (H) x 13.0 (D) (max) mm.
|
|
in stock
PN: 12111000
Capacitive Touch Displays it for Apalis & Colibri modules
40 pin and 10 pin FFC cable to connect it with a Carrier Board, Atmel touch driver, Operating temperature: -20° to +70° C, Range. Size: 173.1 (W) x 112.5 (H) x 13.0 (D) (max) mm.
|
|
in stock
PN: 21041000
LM816 USB WiFi | V1.0A
LM816 USB WiFi for Apalis and Colibri Family
Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible), BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes, WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes, Can be setup as a ad-hoc network via peer to peer communications.
|
|
in stock
PN: 01192001
Analogue Camera Adpater | V2.0B
Analogue Camera Adapter for Apalis & Colibri modules
Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync, No external power supply required, Compatible with Colibri Evaluation Board and Apalis Evaluation Board.
|
|
in stock
PN: 01131100
Carrier Board Accessory Kit | V1.1A
Accessory kit for Toradex carrier boards
Power Adapter: 12VDC 30W with international plugs, Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board.
|
|
in stock
PN: 01491100
CSI Camera Module 5MP OV5640 | V1.1A
CSI Camera Module for Apalis Modules
No external power supply required, 24 way 0.5mm pitch FFC cable included in scope of delivery.
|
|
low stock
Derzeit niedriger Lagerbestand. Demnächst mehr verfügbar. Bitte kontaktieren Sie uns für Details.
