Colibri PXA270

The Colibri PXA270 is a widely used SODIMM sized computer module based on the Intel/Marvell XScale® Arm® PXA270M processor. Colibri PXA270 modules run at 312MHz or 520MHz, and consume less than 800mW. The processor's power consumption is optimized using Intel Wireless Speedstep® Technology. The module comes with a pre-installed and fully licensed WinCE 5/6 core OS. Linux is also available.

Colibri PXA270

Die Produktgruppe Colbri PXA ist am Ende ihrer Produktlaufzeit (EOL). Wir empfehlen Ihnen alternative SoMs wie zum Beispiel die Colibri iMX6 System on Module Produktfamilie oder Colibri iMX7 System on Module Produktfamilie. Unser gesamtes Colibri-Portfolio finden Sie hier.

Highlights

Computermodul basierend auf Marvell/Intel XScale® PXA270M

Der Colibri PXA270 ist ein häufig genutztes SODIMM-Computermodul, das auf dem Intel/Marvell XScale® Arm® PXA270M-Prozessor basiert. Colibri PXA270-Module laufen mit 312 MHz oder 520 MHz und verbrauchen weniger als 800 mW. Die Stromaufnahme des Prozessors wird durch Einsatz der Intel Wirbels Speedstep®-Technologie optimiert. Colibri-Module nutzen die neueste Technologie und sind auf Systeme mit geringer Leistung ausgelegt, die eine hohe CPU-Leistung benötigen. Sie sind mit allen Schnittstellen ausgestattet, die in einem modernen Embedded-Gerät benötigt werden.

Neben dem internen Flash-Speicher gibt es zahlreiche Schnittstellen für die Datenspeicherung. USB-MemoryStick, CompactFlash/PCMCIA und SDCard.

Colibri-Module bieten klebefreie Konnektivität zu passiven und aktiven LCDs mit Auflösungen von bis zu 1024x768 sowie 4-adrigen resistiven Touch-Screens. Ein integrierter 16-bit Stereo-Codec gestattet das Abspielen und die Aufzeichnung von Audio. Colibris können direkt an einen CMOS-Kamerasensor angeschlossen werden.

Darüber hinaus bieten Colibris 100 MB Ethernet sowie USB Host- und USB-Gerätekonnektivität.

Flexibilität und zweite Quelle

Colibris können skaliert werden, um bestimmte Kostenanforderungen zu erfüllen. Der gesamte CPU-Bus steht für benutzerdefinierte Erweiterungen zur Verfügung, wie beispielsweise spezielle Schnittstellen für Anwendungen mit hoher Bandbreite.

Colibri-Module können als Ersatz für die Modulfamilie Trizeps III/VVV von Keith & Koep verwendet werden.

Professionelle Entwicklungstools

Colibris sind bei der Auslieferung mit dem Betriebssystem Windows CE ausgestattet, ebenso wie mit neuesten Entwicklungstools, die eine einfache Anpassung des Systems an spezielle Anforderungen gestatten (z. B. LCD-Einstellungen und Timing, Integration von benutzerdefinierter Software und Autostart-Option beim Einschalten).

Damit können sich die Benutzer auf ihre eigentliche Anwendung konzentrieren, ohne sich noch darum kümmern zu müssen, ein Betriebssystem einzurichten. Auf Anfrage stellt Toradex spezielle Treiber bereit.

Neuste Informationen über Colibri PXA270

Sie finden die neusten Informationen über die Colibri PXA270 Entwicklungsmuster im Toradex Developer Center.

Betriebssysteme

Windows

Windows Embedded Compact

Windows Embedded CE 6.0 is supported on Colibri PXAxxx modules. The development and maintenance is carried out in-house by Toradex. WEC allows you to use Microsoft .Net Compact Framework and Visual Studio.

The price of the Colibri PXAxxx modules includes a runtime license for Windows Embedded CE 6.0 Core.

For general information about advantages and features, check our Windows Embedded Compact page.

Get Started

Eigenschaften

Vorderseite
Rückseite
 

Colibri PXA270 520MHz

PN: 0009
  •  
 

Colibri PXA270 312MHz

PN: 0008
  •  
CPU Name
CPU Type
CPU Clock
L1 Instruction Cache
L1 Data Cache
Marvell® PXA270
Intel XScale® Arm
520 MHz
32KB
32KB
Marvell® PXA270
Intel XScale® Arm
312 MHz
32KB
32KB
RAM
Flash
64MB SDRAM (32 Bit)
32MB NOR (32 Bit)
64MB SDRAM (32 Bit)
32MB NOR (32 Bit)
USB 2.0
Ethernet
External Bus
I2C
SPI
Compact Flash
UART
IrDA
PWM
GPIO
Analog Input
SDIO/SD/MMC
1x Host (Full Speed)
1x OTG (Full Speed)
10/100 Mbit
32 Bit
1x
3x
1x
3x
1x
4x
Up to 85
4x (12 Bit)
1x 4 Bit
1x Host (Full Speed)
1x OTG (Full Speed)
10/100 Mbit
32 Bit
1x
3x
1x
3x
1x
4x
Up to 85
4x (12 Bit)
1x 4 Bit
Graphics Controller
RGB
Resistive Touch
Camera Parallel Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
Integrated
1024 x 768 x 18bpp
4/5-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
Integrated
1024 x 768 x 18bpp
4/5-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
Included Runtime License
Preinstalled OS
Size
Temperature
Power Dissipation
67.6 x 36.7 x 6.2 mm
-10° to 70° C
0.45 - 1.4 W
67.6 x 36.7 x 6.2 mm
-10° to 70° C
0.45 - 1.4 W
Intended Use
Minimum Product Commitment
2020
2020

Trägerkarten

Das Carrier-Board stellt die notwendigen Signal- und Leistungslevel für das CoM bereit. Es beherbergt auch die anwendungsspezifischen Konnektivitäts- und Multimedia-Schnittstellen, wie USB, Ethernet, UART und HDMI

Mehr erfahren über SBCs und Carrier-Boards

Colibri Evaluation Board

Datenblatt

Iris Carrier Board

Datenblatt

Viola Carrier Board

Viola Datasheet
Supported Modules
USB 2.0
Ethernet
External Bus
I2C
SPI
UART
IrDA
PWM
GPIO
Analog Input
SDIO/SD/MMC
CAN
JTAG
Entire Colibri Family
4x Host, 1x OTG/Client
10/100 Mbit
Up to 32 Bit
4x
4x
2x RS232, 1x RS422/485
1x
4x
up to 158
4x
1x 4 Bit
1x
Yes
Entire Colibri Family
1x Host / 1x OTG
10/100 Mbit
1x
1x
3x RS232
4x
up to 26
4x
1x 4 Bit (microSD)
Entire Colibri Family
2x Host, 1x Client (Shared)
10/100 Mbit
1x
1x
3x /
3x TTL
4x
up to 35
4x
1x 4 Bit (microSD)
1x (Available with Colibri VFxx and iMX)
Entire Colibri Family
2x Host, 1x Client (Shared)
10/100 Mbit
1x
1x
2x TTL, 1x USB-UART
4x
up to 39
4x
1x 4 Bit (SD/MMC)
1x (Available with Colibri VFxx and iMX)
Yes
Switches
LEDs
6x
4x
up to 3x
LVDS
HDMI
VGA
RGB
Capacitive Touch Interface
Resistive Touch
Camera Parallel Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Single Channel
1x (Through DVI-I connector)
1x
1x (18 Bit/24 Bit)
Adapter required
4/5-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
1x Dual Channel
1x (Through DVI-I connector)
1x (Through DVI-I connector)
1x (18 bit)
Yes
4/5-wire
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (18 bit)
Adapter required
4-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (Shared with RGB)
1x (18 bit)
Yes
4-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Included Accessory
Altium CAE Data Freely Available
1x
1x
Mating Power Plug (for X33)
24-way FFC 100mm (for X6)
Yes
1x
Mating Power Plug (for X17)
24-way FFC 35mm (for X4)
Yes
1x (*Not Assembled) /
1x
Yes
Arduino UNO and Raspberry Pi B+
1x
1x
Yes
Supply Voltage
On-Board Power Supplies
Size
Temperature
7-27V DC
5V 5A
3.3V 5A
200 x 200 mm
6-27V DC
5V 5A
3.3V 5A
100 x 72 mm
-20° to 85° C
5V DC +/- 5%
5V (External)
3.3V 3A
74 x 74 mm
-40° to 85° C
5V DC +/- 5%
3.3V 3A
100 x 80 mm
-25° to 85° C
Intended Use
Pricing
Minimum Product Commitment
For Evaluation/Development
1 : 229,00 $
For End Products
1-99 : 79,95 $
>99 : RFQ
2030
For End Products
1-99 : 33,60 $
>99 : RFQ
2034+
For Evaluation/Development
1 : 69,90 $

Zubehör

Toradex bietet standardmäßig Zubehör an, das direkt in Endprodukten verwendet werden kann. Für einige dieser Zubehörteile sind Konstruktionsdateien mit Montagezeichnungen, Schaltplänen und Altium-Projekten verfügbar.
Toradex testet die in seinem Webshop aufgeführten Peripheriegeräte und arbeitet direkt mit Anbietern von Kameras, Modems, Displays, Sensoren und mehr zusammen, um die Integration mit Toradex SoMs so einfach wie möglich zu gestalten.

Erfahren Sie mehr in unserem Developer Center
Colibri Fasteners
  • 1 Fastener bag contains 100 Fasteners
LM816 USB WiFi
  • Plug and Play (Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
Analogue Camera Adpater
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
Have a Question?