Apalis 評価ボードはApalis製品ファミリーの機能と性能を調査し評価することのできる柔軟な開発環境です。物理コネクターと標準ピッチヘッダーを用いてApalisが持つインターフェースに簡単に接続することができます。ブレイクアウトエリアにより数多くのApalisインターフェースを簡単に測定でき、かつまた、信号のジャンパや切断を容易に行うことができます。

Apalis 評価ボードのPCBは、1層のみを高速信号の配線に用いた4層で構成されています。これは Direct Breakout テクノロジーにより最小限のリスクと労力で、最先端のインターフェースを極めて容易に実装できることを示します。回路図、レイアウト、IPC- 7351規格準拠部品ライブラリーといったCAEデータは、当社の開発者ウェブサイトから自由にダウンロードしていただけます。

 
 
Connectivity
Supported Modules
USB 3.0
PCIe
USB
I2C
SPI
UART
IrDA
PWM
GPIO
Analog Input
Ethernet
Serial ATA
SDIO/SD/MMC
CAN
Input / Output
Switches
LEDs
Multimedia
LVDS
Digital Audio
S/PDIF In / Out
HDMI
VGA
RGB
Resistive Touch
Camera Parallel Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
 
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Altium CAE Data Freely Available
JTAG
Physical
Supply Voltage
On-Board Power Supplies
Size
Pricing
 
Apalis 評価ボード
今すぐ購入
 
Entire Apalis Family
1x Host, 1x OTG
3x (2 x1 PCIe Slot, 1x Mini PCIe)
4x Host (High Speed)
3x
2x
2x RS232
1x RS422/485
1x
4x
up to 135
4x
10/100/1000 Mbit
1x (Shared by SATA & mSATA)
1x 8 Bit
1x 4 Bit
2x
 
8x
8x
 
1x Dual Channel
HDA 7.1 Codec (Including Analogue Connectors)
1x
1x (Through DVI-I connector)
1x
1x (24 Bit)
4/5-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
 
Yes
1x
1x
Yes
Yes
 
7-27V DC
5V 5A
3.3V 5A
250 x 250 mm
 
1 :USD 229.00
10 アクセサリー
 
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis T30
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • x16 (x4 mode) PCI Express slot
  • Push button for entering Apalis T30 recovery mode
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
  • 1x Generic Header, 1x USB 2.0
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • EDT 5.7" Display with 640x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -10° to 60° C
  • EDT 7" Display with 800x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -20° to 70° C
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps, 802.11b/g/h-compatible
  • 1x1 SISO technology improves effective throughput and range over existing 802.11 b/g products
  • 802.11e-compatible bursting and I standards
  • BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
  • WEP, TKIP, AES, WPA and WPA2 hardware encryption schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Uses Analog Devices, ADV7280 video decoder
  • Analogue Camera Input : 4 multiplexed video input channels, supporting NTSC / PAL / SECAM composite video signals
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
  • Cables: USB, Ethernet, RS232, Jumper Wires
  • Adapters: DVI to VGA, HDMI to DVI, USB to RS232, USB Micro-A to A (USB Micro-AB receptacle to Type A), RS232 Header to D-Sub, Iris Power-adapter
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board
1 キャリアボード, 8 アクセサリー
Evaluation Product

Connectivity: USB 3.0: 1x Host, 1x OTG, USB: 4x Host (High Speed), 10/100/1000 Mbit Ethernet, 3x I2C, 2x SPI, 4x PWM, 4x ADC, 2x CAN, 8x Switches, 8x LEDs, up to 135 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x S/PDIF In / Out, 1x Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 5A
3.3V 5A On-Board Power Supplies, Size: 250 x 250 mm

数量
単価
>1
USD 229.00

in stock

Volume Product

Heatsink for Apalis iMX6Q IT and Apalis iMX6D IT modules

Compatible with Apalis iMX6Q IT and Apalis iMX6D IT, Contains the TIM (Thermal Interface Material) and 4 screws, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additonal threaded holes available for attaching fan to the carrier board.

数量
単価
1-99100-249250-499500-999>1000
USD 12.35USD 11.20USD 10.10USD 9.00RFQ

in stock

Volume Product

Heatsink for Apalis T30 module

Compatible with Apalis T30, Contains the TIM (Thermal Interface Material) and 4 screws, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additonal threaded holes available for attaching fan to the carrier board.

数量
単価
1-99100-249250-499500-999>1000
USD 12.35USD 11.20USD 10.10USD 9.00RFQ

in stock

Volume Product

Heatsink for Apalis TK1, iMX6Q and iMX6D modules

Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1, Contains the TIM (Thermal Interface Material) and 4 screws, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additonal threaded holes available for attaching fan to the carrier board.

数量
単価
1-99100-249250-499500-999>1000
USD 12.35USD 11.20USD 10.10USD 9.00RFQ

in stock

Evaluation Product

Mezzanine board for Apalis T30 module

x16 (x4 mode) PCI Express slot, Push button for entering Apalis T30 recovery mode, CSI and DSI interfaces on one connector, Push button for Apalis T30 reset.

数量
単価
>1
USD 35.85

in stock

Evaluation Product

Mezzanine board for Apalis iMX6 module

1x Generic Header, 1x USB 2.0, 1x Tactile switch to enter Apalis iMX6 module recovery mode, 1x Tactile switch to reset Apalis iMX6 module.

数量
単価
>1
USD 35.85

in stock

Product Change Notification

5.7" TFT VGA with Touch Display for Apalis & Colibri modules

EDT 5.7" Display with 640x480px, 18-bit RGB, 4-Wire Resistive Touch, Unified TFT Interface from EDT, 250mm FFC cable, -10° to 60° C, Range. Size: 124.7 (W) x 100 (H) x 11.7 (D) (MAX) mm.

数量
単価
>1
USD 114.25

in stock

Evaluation Product

Analogue Camera Adapter for Apalis & Colibri modules

Uses Analog Devices, ADV7280 video decoder, Analogue Camera Input : 4 multiplexed video input channels, supporting NTSC / PAL / SECAM composite video signals, Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync, No external power supply required, Compatible with Colibri Evaluation Board and Apalis Evaluation Board.

数量
単価
1-99100-249250-499500-999>1000
USD 43.70USD 39.20USD 38.10USD 37.00RFQ

in stock

Accessory kit for Toradex carrier boards

Cables: USB, Ethernet, RS232, Jumper Wires, Adapters: DVI to VGA, HDMI to DVI, USB to RS232, USB Micro-A to A (USB Micro-AB receptacle to Type A), RS232 Header to D-Sub, Iris Power-adapter, Power Adapter: 12VDC 30W with international plugs, Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board.

数量
単価
>1
USD 28.00

in stock