Capacitive Touch Display

This display is directly compatible with the complete Colibri SoM family, as well as the Apalis T30 and the Apalis iMX6 Modules. It works with the Ixora and Aster Carrier Boards out-of-the-box.

Capacitive Touch Display

Highlights

Description

7.0” WVGA 800 x 3 (RGB) x 480 High Brightness Capacitive Touch TFT Module for the use with Toradex Apalis and Colibri modules.

  • 7" WVGA, a-Si TFT Display
  • 18-bit RGB + TCON
  • 40 pin and 10 pin FFC cable to connect it with a Carrier Board
  • Atmel touch driver

Out-of-the-Box Experience with Toradex Carrier Boards

This display is directly compatible with the complete Colibri SoM family, as well as the Apalis T30, Apalis iMX6 and Apalis iMX8X. It works with the following Toradex Carrier Boards out-of-the-box:

Using the Capacitive Touch Adapter, the following Boards are compatible as well:

Scope of delivery

  • 7” Capacitive Touch Display Panel 
  • 10 Pins 0.5mm FFC Ribbon Cable
  • 40 Pins 0.5mm FFC Ribbon Cable
 

Features

FRONT
BACK
 

Capacitive Touch Display 7" Parallel

PN: 1211
  •  
Buy Now
Accessory Feature 4
Accessory Feature 5
40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
Atmel touch driver
Supply Voltage
Size
Temperature
3.3V
173 x 112 x 13 mm
-20° to 70° C
Intended Use
Pricing
For Evaluation/Development
1 : $119.90

Carrier Boards

The carrier board provides the necessary signal and power levels to the CoM. It also houses the application-specific connectivity and multimedia interfaces, such as USB, Ethernet, UART and HDMI.

Learn more about SBCs and Carrier Boards

Ixora Carrier Board

Ixora Datasheet
Supported Modules
USB 3.0
USB 2.0
Ethernet
PCIe
I2C
SPI
UART
PWM
GPIO
Analog Input
Serial ATA
SDIO/SD/MMC
CAN
JTAG
Entire Apalis Family
2x Host
1x Host / 1x OTG
Gigabit
1x (Mini PCIe)
2x
1x
3x RS232
4x
up to 40
4x
1x mSATA
1x 4 Bit (microSD)
2x
Entire Colibri Family
2x Host, 1x Client (Shared)
10/100 Mbit
1x
1x
2x TTL, 1x USB-UART
4x
up to 39
4x
1x 4 Bit (SD/MMC)
1x (Available with Colibri VFxx and iMX)
Yes
LEDs
2x
up to 3x
LVDS
HDMI
S/PDIF In / Out
VGA
RGB
Capacitive Touch Interface
Resistive Touch
Camera Parallel Interface
Camera Serial Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Dual Channel
1x
1x / 1x
1x (24 Bit)
Yes
4/5-wire
1x 10 Bit
1x Quad Lane MIPI CSI-2
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (Shared with RGB)
1x (18 bit)
Yes
4-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Altium CAE Data Freely Available
1x
Yes
Arduino UNO and Raspberry Pi B+
1x
1x
Yes
Supply Voltage
On-Board Power Supplies
Size
Temperature
7-27V DC
5V 6A
3.3V 8A
125 x 90 mm
-20° to 85° C
5V DC +/- 5%
3.3V 3A
100 x 80 mm
-25° to 85° C
Intended Use
Pricing
Minimum Product Commitment
For End Products
1-99 : $134.40
>99 : RFQ
2034+
For Evaluation/Development
1 : $69.90

Accessories

Toradex offers off-the-shelf accessories that can be directly used in end products. For a few of these accessories, design files including assembly drawings, schematics and Altium projects are available.
Toradex tests the peripherals listed in its webshop and works directly with vendors of Cameras, Modems, Displays, Sensors, and more, to make the integration with Toradex SoMs as easy as possible.

Learn more on our Developer Center

Buy Now

1 Modules, 2 Carrier Boards, 1 Accessories
V1.0B
Capacitive Touch Display 7
PN: 12111001

Capacitive Touch Displays for Apalis & Colibri modules

40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board. Atmel touch driver. -20° to 70° C Temp, Range. Size: 173 x 112 x 13 mm.

  • Quantity
    >0
  • Unit Price
    $119.90
Intended Use: For Evaluation/Development
V1.3A
Ixora Carrier Board V1.3A
PN: 01331300
Volume Production

Small form-factor Apalis Arm Computer Module family Carrier Board

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host/ 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x/ 1x S/PDIF In/ Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 6A, 3.3V 8A On-Board Power Supplies, Size: 125 x 90 mm

  • Quantity
    1-99
    >99
  • Unit Price
    $134.40
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For End Products
V1.1B
Aster Carrier Board
PN: 01431101
Sample Production

Small form-factor with header compatible with Arduino Uno and Raspberry Pi (RPi) maker boards

Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 3x LEDs, up to 39 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4-wire Resistive Touch

Physical: 5V DC +/- 5% Supply Voltage, 3.3V 3A On-Board Power Supplies, Size: 100 x 80 mm

  • Quantity
    >0
  • Unit Price
    $69.90
Intended Use: For Evaluation/Development
V1.0A
Capacitive Touch Adapter
PN: 01511000
Sample Production

Capacitive Touch Adapter for the new Parallel Capacitive Touch Displays. .

-30° to 85° C Temp, Range. Size: 20 x 20 x 8.4 mm.

  • Quantity
    >0
  • Unit Price
    $19.90
Intended Use: For Evaluation/Development
Have a Question?