Compatible with Apalis iMX6Q IT and Apalis iMX6D IT. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40°C to +200°C Temp.

Heatsink for Apalis T30 module

Compatible with Apalis T30. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board.

Heatsink for Apalis TK1, iMX6Q and iMX6D modules

Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40°C to +200°C Temp.

Heatsink for Apalis iMX8 modules

Compatible with Apalis iMX8. Easily mounted to the Apalis Carrier Boards by means of 4 screws. Additional threaded holes available for attaching fan to the carrier board.

Heatsink Fan is compatible with all Apalis Heatsink types and plug-and-play with Apalis Evaluation Board and Ixora Carrier board.

The fan is intended for development and evaluation purposes only.

Compatible with Apalis Evaluation Board and Ixora Carrier Board.

Mezzanine board for Apalis T30 module

CSI and DSI interfaces on one connector. Push button for Apalis T30 reset.

Mezzanine board for Apalis iMX6 module

1x Tactile switch to enter Apalis iMX6 module recovery mode. 1x Tactile switch to reset Apalis iMX6 module, Range. Size: 100 x 60 mm.

Mezzanine board for Apalis TK1 module

1x DSI and 3x MIPI CSI connectors. 1x Tactile switch to enter Apalis TK1 recovery mode. 1x Tactile switch to reset Apalis TK1 module.

Resistive Touch Displays it for Apalis & Colibri modules

Touch: 4-Wire Resistive Touch. 40 pin FFC cable (250mm) to connect it with a Carrier Board. No special drivers required. -20° to +70° C Temp, Range. Size: 164.9 x 100.0 x 13.0 mm.

Capacitive Touch Displays for Apalis & Colibri modules

40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board. Atmel touch driver. -20° to +70° C Temp, Range. Size: 173 x 112 x 13 mm.

Capacitive Touch Displays (LVDS) for Apalis modules

LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board. -20° to +70° C Temp, Range. Size: 248.5 x 166.1 x 15.0 mm.

LM816 USB WiFi for Apalis and Colibri Family

Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10°C to +60°C Temp, Range. Size: 17 x 15 x 8 mm.

Analogue Camera Adapter for Apalis & Colibri modules

Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync. No external power supply required. Compatible with Colibri Evaluation Board and Apalis Evaluation Board. -10°C to +60°C Temp, Range. Size: 60 x 50 x 9.4 mm.

Accessory kit for Toradex carrier boards

Power Adapter: 12VDC 30W with international plugs. Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board.

Capacitive Touch Adapter for the new Parallel Capacitive Touch Displays. .

-30° to +85° C Temp, Range. Size: 20 x 20 x 8.4 mm.

Cable length: 100mm. Frequency bands: 2.4 GHz and 5 GHz (dual-band). Manufacturer: Unictron. Reference: AA222 (H2B1PD1A1C385L), Range. Size: 40.0 x 6.0 x 0.5 mm.

Frequency bands: 2.4 GHz and 5 GHz (dual-band). Manufacturer: Chang Hong. Reference: DA-2458-02, Range. Size: 106.0 x 10.0 (max. diameter) mm.

Cable length: 100mm.

Cable length: 200mm.

Cable length: 200mm. Suitable for outdoor-usage (IP67).