Filters
Please read the information given below if you are new to our webshop.
Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 2x Gigabit Ethernet, 4x I2C, 1x SPI, 3x PWM, 4x ADC, 2x CAN, Up to 98x GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).
Physical: 7-24V DC ±10% Supply Voltage, Size: 250mm x 200mm
Limited stock
Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 1x Gigabit Ethernet, 3x I2C, 1x SPI, 3x PWM, 4x ADC, 1x CAN, Up to 47x GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).
Physical: 5-27V DC or USB-C (PD and BC) Supply Voltage, Size: 120mm x 120mm
Limited stock
Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 1x Gigabit Ethernet, 3x I2C, 1x SPI, 3x PWM, 4x ADC, 1x CAN, Up to 47x GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).
Physical: 5-27V DC or USB-C (PD and BC) Supply Voltage, Size: 120mm x 120mm
Limited stock
Compatible with Apalis iMX6Q IT and Apalis iMX6D IT. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40°C to +200°C Temp.
In stock
Heatsink for Apalis T30 module
Compatible with Apalis T30. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board.
In stock
Heatsink for Apalis TK1, iMX6Q and iMX6D modules
Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40°C to +200°C Temp.
Limited stock
Heatsink for Apalis iMX8 modules
Compatible with Apalis iMX8. Easily mounted to the Apalis Carrier Boards by means of 4 screws. Additional threaded holes available for attaching fan to the carrier board.
In stock
Heatsink Fan is compatible with all Apalis Heatsink types and plug-and-play with Apalis Evaluation Board and Ixora Carrier board.
The fan is intended for development and evaluation purposes only.
Compatible with Apalis Evaluation Board and Ixora Carrier Board.
In stock
Mezzanine board for Apalis T30 module
CSI and DSI interfaces on one connector. Push button for Apalis T30 reset.
In stock
Mezzanine board for Apalis iMX6 module
1x Tactile switch to enter Apalis iMX6 module recovery mode. 1x Tactile switch to reset Apalis iMX6 module, Range. Size: 100 x 60 mm.
In stock
Mezzanine board for Apalis TK1 module
1x DSI and 3x MIPI CSI connectors. 1x Tactile switch to enter Apalis TK1 recovery mode. 1x Tactile switch to reset Apalis TK1 module.
In stock
Heatsink for Verdin iMX8M Mini and iMX8M Plus modules
Compatible with Verdin iMX8M Mini and Verdin iMX8M Plus. 4 screws (M2x10mm) included with each heatsink for easy mounting to Verdin Carrier Boards, Range. Size: 85.6 x 38 x 14.27 mm.
Limited stock
Heatsink for Verdin iMX8M Mini and iMX8M Plus modules
Compatible with Verdin iMX8M Mini and Verdin iMX8M Plus. 4 screws (M2x10mm) included with each heatsink for easy mounting to Verdin Carrier Boards, Range. Size: 85.6 x 38 x 14.27 mm.
Limited stock
Fasteners for Colibri modules
1 Fastener bag contains 100 Fasteners.
In stock
Resistive Touch Displays it for Apalis & Colibri modules
Touch: 4-Wire Resistive Touch. 40 pin FFC cable (250mm) to connect it with a Carrier Board. No special drivers required. -20° to +70° C Temp, Range. Size: 164.9 x 100.0 x 13.0 mm.
In stock
Capacitive Touch Displays for Apalis & Colibri modules
40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board. Atmel touch driver. -20° to +70° C Temp, Range. Size: 173 x 112 x 13 mm.
In stock
Capacitive Touch Displays (LVDS) for Apalis modules
LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board. -20° to +70° C Temp, Range. Size: 248.5 x 166.1 x 15.0 mm.
In stock
LM816 USB WiFi for Apalis and Colibri Family
Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10°C to +60°C Temp, Range. Size: 17 x 15 x 8 mm.
In stock
HDMI Adapter for Colibri modules
No external power supply required, Range. Size: 32 x 32 mm.
In stock
Analogue Camera Adapter for Apalis & Colibri modules
Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync. No external power supply required. Compatible with Colibri Evaluation Board and Apalis Evaluation Board. -10°C to +60°C Temp, Range. Size: 60 x 50 x 9.4 mm.
In stock