Ixora Carrier Board

The Ixora Carrier Board is a fully featured carrier board for the Apalis module family. Along with the standard interfaces, Ixora comes with a combination of widely used Industrial interfaces like CAN 2.0b, I2C, and GPIOs which make it perfectly suitable for Industrial and embedded solutions. It also features mSATA, Mini PCIe and Micro SD slots, which lend the board its high flexibility and scalability. The Ixora is designed to be used as either SW development board or for small to medium volumes products.

Ixora Carrier Board

Highlights

The Ixora carrier board is compatible with the Apalis Arm family of modules. The Ixora carrier board packs a large number of Apalis features into a very optimised small form factor which has been designed to be cost effective in small to medium volume applications. It is designed to be used with the Apalis iMX8 (based on NXP® i.MX 8QuadMax SoC), Apalis iMX6 (based on NXP® i.MX 6 SoCs) Computer on Modules.

The majority of standard interfaces supported by the Apalis modules are supported by the Ixora carrier board using a combination of real-world connectors, card slots and 2.54 mm pitch pin headers.

High-speed interfaces include Mini PCI-Express, MicroSD, Gigabit Ethernet and mSATA. Support for common industrial interfaces including I2C, SPI, RS232, CAN and GPIO makes the Ixora carrier board perfectly suited for industrial and embedded applications.

Supported multimedia interfaces include HDMI, LVDS, TFT LCD, Digital and Analogue Audio, 10 bit parallel camera interface, MIPI Camera Serial Interface, and Resistive Touch.

  • Ixora V1.1 is compatible with all Apalis modules except for Apalis iMX8 SKUs
  • Ixora V1.2 is compatible with all Apalis modules


Features

FRONT
BACK
 

Ixora Carrier Board V1.3A

PN: 0133
  •  
Buy Now
Supported Modules
USB 3.0
USB 2.0
Ethernet
PCIe
I2C
SPI
UART
PWM
GPIO
Analog Input
Serial ATA
SDIO/SD/MMC
CAN
Entire Apalis Family
2x Host
1x Host / 1x OTG
Gigabit
1x (Mini PCIe)
2x
1x
3x RS232
4x
up to 40
4x
1x mSATA
1x 4 Bit (microSD)
2x
LEDs
2x
LVDS
HDMI
S/PDIF In / Out
RGB
Capacitive Touch Interface
Resistive Touch
Camera Parallel Interface
Camera Serial Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Dual Channel
1x
1x / 1x
1x (24 Bit)
Yes
4/5-wire
1x 10 Bit
1x Quad Lane MIPI CSI-2
1x (Stereo)
1x (Mono)
1x (Stereo)
RTC on Board
Altium CAE Data Freely Available
1x
Yes
Supply Voltage
On-Board Power Supplies
Size
Temperature
7-27V DC
5V 6A
3.3V 8A
125 x 90 mm
-20° to 85° C
Intended Use
Pricing
Minimum Product Commitment
For End Products
1-99 : $134.40
>99 : RFQ
2034+

Accessories

Toradex offers off-the-shelf accessories that can be directly used in end products. For a few of these accessories, design files including assembly drawings, schematics and Altium projects are available.
Toradex tests the peripherals listed in its webshop and works directly with vendors of Cameras, Modems, Displays, Sensors, and more, to make the integration with Toradex SoMs as easy as possible.

Learn more on our Developer Center
Apalis Heatsink Type 1
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Type 2
  • Compatible with Apalis T30
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Type 3
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Type 4
  • Compatible with Apalis iMX8
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Fan
  • Compatible with Apalis Evaluation Board and Ixora Carrier Board
Capacitive Touch Display 10.1" LVDS
  • LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board
LM816 USB WiFi
  • Plug and Play (Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
Analogue Camera Adapter
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
Carrier Board Accessory Kit
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board
CSI Camera Set 5MP Color AR0521
  • MIPI CSI-2 interface
  • onsemi AR0521 1/2.5" 5MP color image sensor with ISP
  • M12 lens mount (S-mount)

Roadmap

Min. Product Commitment
2034+
 
 
Hardware Roadmap

This roadmap indicates how the product is planned from a Toradex hardware development point of view. This is not a detailed release date representation, but visualization of our internal product development timeline.
For details about the Toradex phase-over policy please refer to the PCN Policy Page.

For more details about PID8 level changes and historical releases please refer to the developer page.

  • 2023
  • 2024
  • 2025
  • 2026
  • 2027
  • 2028
0133 Ixora Carrier Board

  •  
  • Volume Production

Buy Now

1 Modules, 8 Accessories
V1.3A
Ixora Carrier Board V1.3A
PN: 01331300
Volume Production

Small form-factor Apalis Arm Computer Module family Carrier Board

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host/ 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x/ 1x S/PDIF In/ Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 6A, 3.3V 8A On-Board Power Supplies, Size: 125 x 90 mm

  • Quantity
    1-99
    >99
  • Unit Price
    $134.40
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For End Products
V1.0B
Apalis Heatsink Type 1
PN: 23051001
Volume Production

Compatible with Apalis iMX6Q IT and Apalis iMX6D IT. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40° to 200° C Temp.

  • Quantity
    1-99
    >99
  • Unit Price
    $17.20
Intended Use: For End Products
V1.0B
Apalis Heatsink Type 3
PN: 23071001
Volume Production

Heatsink for Apalis TK1, iMX6Q and iMX6D modules

Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40° to 200° C Temp.

  • Quantity
    1-99
    >99
  • Unit Price
    $17.20
Intended Use: For End Products
V1.0B
Apalis Heatsink Type 4
PN: 23081001
Volume Production

Heatsink for Apalis iMX8 modules

Compatible with Apalis iMX8. Easily mounted to the Apalis Carrier Boards by means of 4 screws. Additional threaded holes available for attaching fan to the carrier board.

  • Quantity
    1-99
    >99
  • Unit Price
    $17.20
Intended Use: For End Products
V1.1A
Apalis Heatsink Fan
PN: 23091100
Sample Production

Heatsink Fan is compatible with all Apalis Heatsink types and plug-and-play with Apalis Evaluation Board and Ixora Carrier board.

The fan is intended for development and evaluation purposes only.

Compatible with Apalis Evaluation Board and Ixora Carrier Board.

  • Quantity
    >0
  • Unit Price
    $19.90
Intended Use: For Evaluation/Development
V1.0A
Capacitive Touch Display 10.1
PN: 12121000

Capacitive Touch Displays (LVDS) for Apalis modules

LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board. -20° to 70° C Temp, Range. Size: 248.5 x 166.1 x 15.0 mm.

  • Quantity
    >0
  • Unit Price
    $258.00
Intended Use: For Evaluation/Development
V1.0A
LM816 USB WiFi
PN: 21041000
Sample Production

LM816 USB WiFi for Apalis and Colibri Family

Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10° to 60° C Temp, Range. Size: 17 x 15 x 8 mm.

  • Quantity
    1-99
    >99
  • Unit Price
    $28.05
Intended Use: For Evaluation/Development
V1.1C
Carrier Board Accessory Kit
PN: 01131102
Sample Production

Accessory kit for Toradex carrier boards

Power Adapter: 12VDC 30W with international plugs. Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board.

  • Quantity
    >0
  • Unit Price
    $50.00
Intended Use: For Evaluation/Development
V1.1A
CSI Camera Set 5MP Color AR0521
PN: 01641100

MIPI CSI-2 camera set based on the onsemi AR0521 image sensor

Key features:
  • MIPI CSI-2 interface
  • onsemi AR0521 1/2.5" 5MP color image sensor with ISP
  • M12 lens mount (S-mount)

MIPI CSI-2 interface. onsemi AR0521 1/2.5" 5MP color image sensor with ISP. M12 lens mount (S-mount). -20° to 60° C (limited by the included lens) Temp.

  • Quantity
    >0
  • Unit Price
    $123.50
Intended Use: For Evaluation/Development
Have a Question?