Call us in Seattle
+1 (800) 871-6550
Aster 载板
Aster is a carrier board for the Colibri Family of Computer on Modules. Aster has been designed to allow fast prototyping and evaluation of solutions using industry proven Colibri SoM pin compatible product line.
特色
兼容 Arduino Uno 和 Raspberry Pi 接口
Aster 是针对 Colibri 系列计算机模块的载板。Aster 可以使用经验证的工业级管脚兼容的 Colibri 系列模块快速验证产品原型和评估解决方案。载板接口兼容 Arduino Uno 和 Raspberry Pi (RPi) ，使用户能够使用大量第三方配件。开发人员可以在开始载板设计之前，简单、快速地评估外设、传感器以及概念验证。
方便异构多核系统开发的 JTAG
Aster 具有 JTAG 接口，方便异构多核系统，诸如 Colibri i.MX7 或者 Colibri VF61 的开发。大部分情况下，载板可以直接通过 USB 接口供电，集成串口转 USB 接口，使用一根 USB 数据线即可使用，减少额外的硬件要求。
和所有 Toradex 载板一样，提供所有的设计文档，包括 Altium Design Project 文件。
载板尺寸为 100mm x 80mm。
配件
Toradex 提供可直接用于最终产品的现成配件。 对于少数配件，可以提供设计文件，包括装配图、原理图和Altium项目。
除了在线商场销售的外设，Toradex 还测试了大量的其他设备，通过与摄像头、调制解调器、显示屏、传感器等厂商直接合作，令其产品可以尽可能便捷得集成到 Toradex 的模块。
- Touch: 4-Wire Resistive Touch
- 40 pin FFC cable (250mm) to connect it with a Carrier Board
- No special drivers required
- 40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
- Atmel touch driver
- Plug and Play (Windows Compact Embedded 6/7 compatible)
- BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
- WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
- Can be setup as a ad-hoc network via peer to peer communications
- No external power supply required
- Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
- No external power supply required
- Compatible with Colibri Evaluation Board and Apalis Evaluation Board
立刻购买
1 模块, 5 配件
V1.1B
PN: 01431101
Small form-factor with header compatible with Arduino Uno and Raspberry Pi (RPi) maker boards
Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 3x LEDs, up to 39 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4-wire Resistive Touch
Physical: 5V DC +/- 5% Supply Voltage, 3.3V 3A On-Board Power Supplies, Size: 100 x 80 mm
-
数量>0
-
单价US$64.90
V1.0B
PN: 12131001
Resistive Touch Displays it for Apalis & Colibri modules
Touch: 4-Wire Resistive Touch. 40 pin FFC cable (250mm) to connect it with a Carrier Board. No special drivers required. -20° to +70° C Temp, Range. Size: 164.9 x 100.0 x 13.0 mm.
-
数量>0
-
单价US$98.50
V1.0B
PN: 12111001
Capacitive Touch Displays for Apalis & Colibri modules
40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board. Atmel touch driver. -20° to +70° C Temp, Range. Size: 173 x 112 x 13 mm.
-
数量>0
-
单价US$119.50
V1.0A
PN: 21041000
LM816 USB WiFi for Apalis and Colibri Family
Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10°C to +60°C Temp, Range. Size: 17 x 15 x 8 mm.
-
数量1-99100-249250-499>499
-
单价US$27.50US$22.90US$21.35
V1.0A
PN: 01141000
HDMI Adapter for Colibri modules
No external power supply required, Range. Size: 32 x 32 mm.
-
数量>0
-
单价US$25.00
Analogue Camera Adapter for Apalis & Colibri modules
Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync. No external power supply required. Compatible with Colibri Evaluation Board and Apalis Evaluation Board. -10°C to +60°C Temp, Range. Size: 60 x 50 x 9.4 mm.
× ![]()
