Capacitive Touch Display 10.1" DSI

This display is directly compatible with the Verdin SoM Family.

Capacitive Touch Display 10.1

Highlights

Out-of-the-Box Experience with Toradex Carrier Boards

It works with the following Toradex Carrier Boards out-of-the-box:

 

Scope of delivery

  • Capacitive Touch Display 10'' DSI panel
  • 34 Pins 0.5mm FFC Ribbon Cable
 

Features

FRONT
BACK
 

Capacitive Touch Display 10.1" DSI

PN: 1214
  •  
Buy Now
Accessory Feature 1
34 Pins 0.5 mm FFC Ribbon Cable (250 mm) to connect with a Carrier Board
Resolution
1280x800, Quad-Lane MIPI® DSI output
Size
Temperature
257.96 x 168.60 x 9.63 mm
-20° to 70° C
Intended Use
For Evaluation/Development

Carrier Boards

The carrier board provides the necessary signal and power levels to the CoM. It also houses the application-specific connectivity and multimedia interfaces, such as USB, Ethernet, UART and HDMI.

Learn more about SBCs and Carrier Boards

Verdin Development Board with HDMI Adapter

Datasheet

Mallow Carrier Board

Datasheet

Ivy Carrier Board

Datasheet

Dahlia Carrier Board with HDMI Adapter

Datasheet
Supported Modules
USB 3.0
USB 2.0
USB 2.0 Debug
Ethernet
PCIe
I2C
SPI
QSPI
UART
PWM
GPIO
Analog Input
RS232
RS485
SDIO/SD/MMC
CAN
Type-specific Extension Connector
JTAG
Low-speed Extension Connector
2x USB-A (Host)
1x USB-C (DualRole)
1x USB-C
2x Gigabit
1x (Mini PCIe)
4x
1x
1x
4x
3x
Up to 98x
4x
1x
1x
1x 4 Bit (Full Size)
2x
Yes
Yes
Entire Verdin Family
2x Host
1x USB-C (DualRole)
Gigabit
1x M.2 (Key B)
4x
1x
4x (1.8V levels)
2x
Up to 40x
4x
1x 4 Bit (microSD)
2x (without transceivers)
2x
Entire Verdin Family
2x Host
1x OTG
2x Gigabit
1x (Mini PCIe)
1x (extension connector)
1x (extension connector)
1x RS232
1x RS485 /
1x RS232 (isolated)
1x RS485 (isolated)
2x isolated digital inputs
4x isolated digital outputs (photo relays)
2x Analog Input
0-25mA
1x 4 Bit (microSD)
2x (with transceivers) /
2x (with isolated transceivers)
1x
2x USB-A (Host)
1x USB-C (DualRole)
1x USB-C
1x Gigabit
1x (Mini PCIe)
3x
1x
1x
4x
3x
Up to 47x
4x
1x 4 Bit (microSD)
1x
Yes
LEDs
4x
1x RGB: power on and status
2x RGB: user configurable
Display Serial Interface
LVDS
HDMI
Digital Audio
Capacitive Touch Interface
Camera Serial Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Quad Lane MIPI DSI
1x (via optional Toradex DSI to LVDS Adapter)
1x Native / 1x Via included Toradex DSI to HDMI Adapter
1x I2S
1x Quad Lane MIPI CSI-2
1x (Stereo)
1x (Stereo)
1x (Stereo)
1x Quad Lane MIPI DSI
1x Dual Channel
1x
1x I2S
Yes
1x Quad Lane MIPI CSI-2
1x Quad Lane MIPI DSI
Yes
1x Quad Lane MIPI DSI
1x (via optional Toradex DSI to LVDS Adapter)
1x Native / 1x Via included Toradex DSI to HDMI Adapter
1x Quad Lane MIPI CSI-2
1x (Stereo)
1x (Mono)
1x (Stereo)
RTC on Board
TPM
Altium CAE Data Freely Available
1x (CR1025)
1x TPM2.0
Yes
1x (CR1025)
1x TPM2.0
Yes
Supply Voltage
On-Board Power Supplies
Size
Temperature
7-24V DC ±10%
250mm x 200mm
0° to 70° C
7-24V DC ±10%
5V 6A
3.3V 7A
1.8V 2A
100 x 72 mm (Pico-ITX)
-25° to 85° C
8-32V /
8-72V
130 x 105 mm
-40° to 85° C
5-24V DC ±10% or USB-C (PD and BC)
120mm x 120mm
0° to 70° C
Intended Use
For Evaluation/Development
For End Products
For End Products
For Evaluation/Development

Accessories

Toradex offers off-the-shelf accessories that can be directly used in end products. For a few of these accessories, design files including assembly drawings, schematics and Altium projects are available.
Toradex tests the peripherals listed in its webshop and works directly with vendors of Cameras, Modems, Displays, Sensors, and more, to make the integration with Toradex SoMs as easy as possible.

Learn more on our Developer Center

Buy Now

1 Modules, 5 Carrier Boards, 1 Accessories
V1.0A
Capacitive Touch Display 10.1
PN: 12141000
10.1” Quad-Lane MIPI DSI, 1280x800p, with I2C Touch Interface and 34 pin FFC cable to connect with a Carrier Board.
  • Quantity
    >0
  • Unit Price
    $197.90
Intended Use: For Evaluation/Development
V1.1F
Verdin Development Board with HDMI Adapter
PN: 99991105

Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 2x Gigabit Ethernet, 1x RS232, 4x I2C, 1x SPI, 3x PWM, 4x ADC, 2x CAN, Up to 98x GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).

Physical: 7-24V DC ±10% Supply Voltage, Size: 250mm x 200mm

  • Quantity
    >0
  • Unit Price
    $330.00
Intended Use: For Evaluation/Development
V1.1C
Mallow Carrier Board
PN: 01611102
Volume Production

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x USB-C (DualRole), Gigabit Ethernet, 4x I2C, 1x SPI, 2x PWM, 4x ADC, 2x (without transceivers) CAN, 4x LEDs, Up to 40x GPIOs

Multimedia:

Physical: 7-24V DC ±10% Supply Voltage, 5V 6A, 3.3V 7A, 1.8V 2A On-Board Power Supplies, Size: 100 x 72 mm (Pico-ITX)

  • Quantity
    1-99
    >99
  • Unit Price
    $110.00
Intended Use: For End Products
V1.0A
TOP
PN: 01751000
Sample Production

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x OTG, 2x Gigabit Ethernet, 1x (extension connector) I2C, 1x (extension connector) SPI, 2x Analog Input, 0-25mA ADC, 2x (with transceivers) CAN, 1x RGB: power on and status, 2x RGB: user configurable LEDs, 2x isolated digital inputs, 4x isolated digital outputs (photo relays) GPIOs

Multimedia:

Physical: 8-32V Supply Voltage, Size: 130 x 105 mm

  • Quantity
    1-99
    >99
  • Unit Price
    $171.90
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For End Products
V1.0A
TOP
PN: 01781000
Sample Production

Connectivity: USB 3.0: 2x Host, USB 2.0: 1x OTG, 2x Gigabit Ethernet, 1x (extension connector) I2C, 1x (extension connector) SPI, 2x Analog Input, 0-25mA ADC, 2x (with isolated transceivers) CAN, 1x RGB: power on and status, 2x RGB: user configurable LEDs, 2x isolated digital inputs, 4x isolated digital outputs (photo relays) GPIOs

Multimedia:

Physical: 8-72V Supply Voltage, Size: 130 x 105 mm

  • Quantity
    1-99
    >99
  • Unit Price
    $247.50
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For End Products
V1.1D
Dahlia Carrier Board with HDMI Adapter
PN: 99981103

Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 1x Gigabit Ethernet, 3x I2C, 1x SPI, 3x PWM, 4x ADC, 1x CAN, Up to 47x GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).

Physical: 5-24V DC ±10% or USB-C (PD and BC) Supply Voltage, Size: 120mm x 120mm

  • Quantity
    >0
  • Unit Price
    $187.00
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For Evaluation/Development
V1.0A
Toradex DSI Display Adapter
PN: 01741000
Sample Production

Compatible with the Verdin Development Board and the DahliaConnects directly to the MIPI DSI connector of compatible carrier boards

Range. Size: 50 x 40 mm.

  • Quantity
    >0
  • Unit Price
    $22.00
Intended Use: For Evaluation/Development
Have a Question?