Carrier Boards - Apalis ARM Family
The Apalis Carrier Boards support advanced interfaces such as PCIe, SATA, Gbit Ethernet along with many more connectivity and multimedia interfaces. These carrier boards are compatible with all the modules in the Apalis family. The Apalis Evaluation Board, which is ideal for engineering development, is a full-blown board that offers all the interfaces supported by Apalis modules. The cost-effective Ixora Carrier Board, with its small form-factor, can be used for mass-production of end-products based on Apalis modules.
×Ixora Carrier Board ×Apalis Evaluation Board Datasheet Datasheet detail... detail... Connectivity
Supported Modules Entire Apalis Family Entire Apalis Family USB 3.0 2x Host 1x Host, 1x OTG PCIe 1x (Mini PCIe) 3x (2 x1 PCIe Slot, 1x Mini PCIe) USB 1x Host (High Speed)
1x OTG (High Speed)
4x Host (High Speed) I2C 2x 3x SPI 1x 2x UART 3x RS232 2x RS232
IrDA — 1x PWM 4x 4x GPIO up to 40 up to 135 Analog Input 4x 4x Ethernet 10/100/1000 Mbit 10/100/1000 Mbit Serial ATA 1x (mSATA) 1x (Shared by SATA & mSATA) SDIO/SD/MMC 1x 4 Bit (microSD) 1x 8 Bit
1x 4 Bit
CAN 2x 2x Input / Output
Switches — 8x LEDs 2x 8x Multimedia
LVDS 1x Dual Channel 1x Dual Channel Digital Audio — HDA 7.1 Codec (Including Analogue Connectors) S/PDIF In / Out 1x 1x HDMI 1x 1x (Through DVI-I connector) VGA — 1x RGB 1x (24 Bit) 1x (24 Bit) Resistive Touch 4/5-wire 4/5-wire Camera Parallel Interface 1x 1x Analog Audio Line in 1x (Stereo) 1x (Stereo) Analog Audio Mic in 1x (Mono) 1x (Mono) Analog Audio Headphone out 1x (Stereo) 1x (Stereo) Other
Type Specific Board Connector — Yes USB-to-RS232 Transceiver — 1x RTC on Board 1x 1x Altium CAE Data Freely Available Yes Yes JTAG — Yes Physical
Supply Voltage 7-27V DC 7-27V DC On-Board Power Supplies 5V 5A
Size 125 x 90 mm 250 x 250 mm
* The exact number of supported interfaces depends on the Computer on Module used along with the carrier board. Please check the respective Computer on Module and Carrier Board datasheets for further details.