Partner Carrier Boards
Below are a selection of Third-party Carrier Boards & Display Assemblies compatible with Toradex System on Modules. These off-the-shelf products are available for development and volume production directly from the Third-party hardware vendors. Please contact hardware vendors directly for additional product information and purchasing instructions.
Have you used Hardware from our partners? We'd like to hear your experience.
2x RS485, 1x Type-specific Extension Connector, 2x USB 2.0, 1x USB 2.0 Debug, 4x Analog Input, 28x Digital Inputs, 28x Digital Outputs, 1x 10/100 MBit Ethernet, 28x GPIO, 1x I2C, 4x PWM, 1x SDIO/SD/MMC, 1x SPI, 1x UART
Analog Audio Headphone out, Analog Audio Line in, HDMI, Resistive Touch, RGB
2x LEDs, 107x125 - Size (in mm), Supply Voltage: 8-24Vdc, 1x Switches
2x RS485, 3x USB 2.0, 1x USB 2.0 Debug, 4x Analog Input, 2x CAN, 1x 10/100 MBit Ethernet, 26x GPIO, 1x I2C, 4x PWM, 1x SDIO/SD/MMC, 1x SPI, 1x UART, 1x miniPCIe
Analog Audio Headphone out, Analog Audio Line in, Analog Audio Mic in, Camera Parallel Interface, Capacitive Touch, Resistive Touch, RGB
1x RTC on Board, 95mm X 115mm - Size (in mm), Supply Voltage: 7VDC to 28VDC, -40C to +85C - Temperature Range (in Celsius), 2x USB-to-RS232 Transceiver
2x USB 2.0, 1x USB 2.0 Debug, 2x 10/100 MBit Ethernet, 1x CAN-FD (8Mbps), 1x miniPCIe, 1x RS-232, 1x RS-485
Image Signal Processor (ISP), Neural Processing Unit (NPU), 3D Acceleration