Below are a selection of 3rd party Carrier Boards & Display Assemblies compatible with Toradex System on Modules. These off-the-shelf products are available for development and volume production directly from the 3rd party hardware vendors. Please contact hardware vendors directly for additional product information and purchasing instructions. 3rd party boards are not verified or tested by Toradex and are listed for informational purposes only. Toradex publishes 3rd party product information as provided by the hardware vendors.
Did you use hardware from any of our partners? We would like to hear your experience.
Results: 1-2 of 2 service partners.
Connectivity: 1x CAN, 1x 10/100 MBit Ethernet, 1x SDIO/SD/MMC, 2x USB 2.0, 1x miniPCIe, 1x RS-485
Multimedia: 2D Acceleration, 3D Acceleration, Capacitive Touch, Display Controller, Display Serial Interface
Others: 3x LEDs, 6-30VDC - On-Board Power Supplies (in Volts), 1x RTC on Board, 1x Switches
Connectivity: 4x 4-20 mA - Analog Input, 4x Digital Inputs, 4x Digital Outputs, 1x 10/100 MBit Ethernet, 20x GPIO, 1x USB
Multimedia: Analog Audio Line in, Display Serial Interface, Resistive Touch
Compatible Accessories: Case, Touch
Others: 18V, 5V & 3.3V DC - On-Board Power Supplies (in Volts), 118 x 137.5 x 45 - Size (in mm), Supply Voltage: 6 to 27V DC