Call us in Seattle
+1 (800) 871-6550
Apalis Evaluation Board
Apalis 开发板提供了灵活的开发环境，它被设计用来探究和评估Apalis产品系列的功能和性能。Apalis的全部接口都能够通过使用一系列真实的连接器和标准排针被容易的连接， 探针区允许探测大量的Apalis接口并且可以能够容易地获得需要的信号。
特色
Apalis 评估板与Apalis Arm模块系列兼容。Apalis评估板提供灵活的开发环境，可以用来探索Apalis计算机模块系列的功能和表现。Apalis支持一系列范围广泛的工业标准接口，同时提供先进的多媒体和高速连接，使它适用于几乎全部的应用。它是被用来设计结合Apalis T30一起使用(基于NVIDIA® Tegra™ 3 SoC)，Apalis iMX6 (基于NXP®/Freescale i.MX 6 SoCs )和Apalis iMX8 (基于NXP® i.MX 8 SoCs) 计算机模块。
Apalis 评估板配有一系列的连接接口，包括USB 3.0, PCI – Express, Serial ATA, Gigabit 以太网， I2C, SPI, RS232， RS485和CAN。支持的多媒体接口包括数字和模拟音频，HDMI, LVDS, VGA 和 TFT LCD。
Apalis 接口可以通过实际的连接器和标准排针来连接。跳线和探针区可以方便的探测，排除故障和根据要求重新部署大量的Apalis接口信号，使其成为贯穿产品开发的十分有用的平台。除了板上的按钮，开关和LEDs可以方便地被补充到跳线区域，支持快速地应用通用的输入/输出方式支持快速的打样。
Apalis 评估板PCB包括四层，其中一层被用来做高速信号的部署。这展示了Direct Breakout技术可以极端便捷地承受最少的风险和努力采用前沿接口。CAE数据包括原理图，布线图和满足IPC-7351的元件库，都可以从我们的 developer website上免费下载。
Need More than just a SBC
Talk to us about Complete Products and SBC Customizations
Complete Ready to use Devices
Complete Solutions offers off-the-shelf, ready-to-use products including a software stack to speed up your development process and lower time-to-market.
Customized Products
With Custom Product Solutions, you have many different starting points available for your customization. Start with our Complete Devices, Carrier Boards, or even our Systems on Module (SoMs) and tailor it to your exact requirements.
- Customize & Design
- Manufacture
- Manage & Maintain
Configure Your SBC
Create your own customized SBC配件
Toradex 提供可直接用于最终产品的现成配件。 对于少数配件，可以提供设计文件，包括装配图、原理图和Altium项目。
除了在线商场销售的外设，Toradex 还测试了大量的其他设备，通过与摄像头、调制解调器、显示屏、传感器等厂商直接合作，令其产品可以尽可能便捷得集成到 Toradex 的模块。
- Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
- 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis T30
- 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
- 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis iMX8
- Easily mounted to the Apalis Carrier Boards by means of 4 screws
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis Evaluation Board and Ixora Carrier Board
- CSI and DSI interfaces on one connector
- Push button for Apalis T30 reset
- 1x Tactile switch to enter Apalis iMX6 module recovery mode
- 1x Tactile switch to reset Apalis iMX6 module
- Touch: 4-Wire Resistive Touch
- 40 pin FFC cable (250mm) to connect it with a Carrier Board
- No special drivers required
- 40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
- Atmel touch driver
- LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board
- Plug and Play (Windows Compact Embedded 6/7 compatible)
- BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
- WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
- Can be setup as a ad-hoc network via peer to peer communications
- Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
- No external power supply required
- Compatible with Colibri Evaluation Board and Apalis Evaluation Board
- Power Adapter: 12VDC 30W with international plugs
- Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board
立刻购买
1 模块, 10 配件
V1.1Z
PN: 01151125
Connectivity: USB 3.0: 1x Host, 1x OTG, USB 2.0: 4x Host, Gigabit Ethernet, 3x I2C, 2x SPI, 4x PWM, 4x ADC, 2x CAN, 8x Switches, 8x LEDs, up to 135 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x (Out also on TOSLINK) S/PDIF In/ Out, 1x 8/10/12 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 250 x 250 mm
-
数量>0
-
单价US$349.40
目前库存有限。即将补货。请联系我们获得详细情况。
预期用途: 用于评估/开发
V1.0B
PN: 23071001
Heatsink for Apalis TK1, iMX6Q and iMX6D modules
Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40° to 200° C Temp.
-
数量1-99>99
-
单价US$17.20
预期用途: 用于最终产品
V1.1A
PN: 23091100
Heatsink Fan is compatible with all Apalis Heatsink types and plug-and-play with Apalis Evaluation Board and Ixora Carrier board.
The fan is intended for development and evaluation purposes only.
Compatible with Apalis Evaluation Board and Ixora Carrier Board.
-
数量>0
-
单价US$19.90
预期用途: 用于评估/开发
V1.0A
PN: 21041000
LM816 USB WiFi for Apalis and Colibri Family
Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10° to 60° C Temp, Range. Size: 17 x 15 x 8 mm.
-
数量1-99>99
-
单价US$28.05
预期用途: 用于评估/开发
× ![]()
