Apalis Evaluation Board

The Apalis Evaluation Board is designed to be a flexible development environment to explore and evaluate the functionality and performance of the Apalis product family. All interfaces on the Apalis can be easily accessed, through a combination of real world connectors and easily accessible, standard pitch headers. The breakout area allows easy probing of a large number of Apalis interfaces and easy access to break and jumper signals as needed.

Apalis Evaluation Board

Highlights

The Apalis Evaluation Board is compatible with the Apalis Arm family of modules. The Apalis Evaluation Board provides a flexible development environment to explore the functionality and performance of the Apalis Computer on Module family. Apalis supports a wide variety of industry standard interfaces, at the same time providing advanced multimedia and high speed connectivity making it suitable for an almost unlimited number of applications. It is designed to be used with the Apalis T30 (based on NVIDIA® Tegra™ 3 SoC), Apalis iMX6 (based on NXP®/Freescale i.MX 6 SoCs) and the Apalis iMX8 (based on NXP® i.MX 8 SoCs)  Computer on Modules.

The Apalis Evaluation Board is equipped with a variety of connectivity interfaces including USB 3.0, PCI-Express, Serial ATA, Gigabit Ethernet, I2C, SPI, RS232, RS485 and CAN. Supported multimedia interfaces include Digital and Analogue Audio, HDMI, LVDS, VGA and TFT LCD.

Apalis interfaces can be easily accessed by means of physical connectors and standard pitch headers. The jumper and breakout areas enable easy probing, debugging and re-routing of a large number of Apalis interface signals as required, which makes it an extremely useful platform throughout product development. Additional on-board buttons, switches and LEDs can be easily patched to the jumper area to support fast prototyping using common input/output methods.

The Apalis Evaluation Board PCB comprises of four layers, of which only one is used for high speed signal routing. This demonstrates how the Direct Breakout technology makes it incredibly easy to implement leading edge interfaces with minimal risk and effort. CAE data including schematics, layout and IPC-7351 compliant component libraries, are freely downloadable from our developer website.

Features

 

Apalis Evaluation Board V1.1Z

PN: 0115
  •  
Buy Now
Supported Modules
USB 3.0
USB 2.0
Ethernet
PCIe
I2C
SPI
UART
IrDA
PWM
GPIO
Analog Input
Serial ATA
SDIO/SD/MMC
CAN
JTAG
Entire Apalis Family
1x Host, 1x OTG
4x Host
Gigabit
2x 1 slot / 1x (Mini PCIe)
3x
2x
2x RS232, 1x RS422/485
1x
4x
up to 135
4x
1x / 1x mSATA (shared)
2x 4 Bit
2x
Yes
Switches
LEDs
8x
8x
LVDS
HDMI
Digital Audio
S/PDIF In / Out
VGA
RGB
Resistive Touch
Camera Parallel Interface
Camera Serial Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Dual Channel
1x (Through DVI-I connector)
7.1 Channel HD Audio Codec (incl. analogue connectors)
1x (Out also on TOSLINK)
1x
1x (24 Bit)
4/5-wire
1x 8/10/12 Bit
On Mezzanine
1x (Stereo)
1x (Mono)
1x (Stereo)
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Altium CAE Data Freely Available
Yes
1x
1x
Yes
Supply Voltage
On-Board Power Supplies
Size
7-27V DC
5V 5A
3.3V 5A
250 x 250 mm
Intended Use
Pricing
For Evaluation/Development
1 : $349.40

Accessories

Toradex offers off-the-shelf accessories that can be directly used in end products. For a few of these accessories, design files including assembly drawings, schematics and Altium projects are available.
Toradex tests the peripherals listed in its webshop and works directly with vendors of Cameras, Modems, Displays, Sensors, and more, to make the integration with Toradex SoMs as easy as possible.

Learn more on our Developer Center
Apalis Heatsink Type 1
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Type 2
  • Compatible with Apalis T30
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Type 3
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Type 4
  • Compatible with Apalis iMX8
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
Apalis Heatsink Fan
  • Compatible with Apalis Evaluation Board and Ixora Carrier Board
Apalis T30 Mezzanine
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
Apalis iMX6 Mezzanine
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
Capacitive Touch Display 10.1" LVDS
  • LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board
LM816 USB WiFi
  • Plug and Play (Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
Analogue Camera Adapter
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
Carrier Board Accessory Kit
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board

Buy Now

1 Modules, 8 Accessories
V1.1Z
Apalis Evaluation Board V1.1Z
PN: 01151125
Sample Production

Connectivity: USB 3.0: 1x Host, 1x OTG, USB 2.0: 4x Host, Gigabit Ethernet, 3x I2C, 2x SPI, 4x PWM, 4x ADC, 2x CAN, 8x Switches, 8x LEDs, up to 135 GPIOs

Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x (Out also on TOSLINK) S/PDIF In/ Out, 1x 8/10/12 Bit Camera Parallel Interface, 4/5-wire Resistive Touch

Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 250 x 250 mm

  • Quantity
    >0
  • Unit Price
    $349.40
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For Evaluation/Development
V1.0B
Apalis Heatsink Type 1
PN: 23051001
Volume Production

Compatible with Apalis iMX6Q IT and Apalis iMX6D IT. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40° to 200° C Temp.

  • Quantity
    1-99
    >99
  • Unit Price
    $17.20
Intended Use: For End Products
V1.0B
Apalis Heatsink Type 3
PN: 23071001
Volume Production

Heatsink for Apalis TK1, iMX6Q and iMX6D modules

Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40° to 200° C Temp.

  • Quantity
    1-99
    >99
  • Unit Price
    $17.20
Intended Use: For End Products
V1.0B
Apalis Heatsink Type 4
PN: 23081001
Volume Production

Heatsink for Apalis iMX8 modules

Compatible with Apalis iMX8. Easily mounted to the Apalis Carrier Boards by means of 4 screws. Additional threaded holes available for attaching fan to the carrier board.

  • Quantity
    1-99
    >99
  • Unit Price
    $17.20
Intended Use: For End Products
V1.1A
Apalis Heatsink Fan
PN: 23091100
Sample Production

Heatsink Fan is compatible with all Apalis Heatsink types and plug-and-play with Apalis Evaluation Board and Ixora Carrier board.

The fan is intended for development and evaluation purposes only.

Compatible with Apalis Evaluation Board and Ixora Carrier Board.

  • Quantity
    >0
  • Unit Price
    $19.90
Intended Use: For Evaluation/Development
V2.0A
Apalis iMX6 Mezzanine
PN: 01172000
Sample Production

Mezzanine board for Apalis iMX6 module

1x Tactile switch to enter Apalis iMX6 module recovery mode. 1x Tactile switch to reset Apalis iMX6 module, Range. Size: 100 x 60 mm.

  • Quantity
    >0
  • Unit Price
    $55.90
Intended Use: For Evaluation/Development
V1.0A
Capacitive Touch Display 10.1
PN: 12121000

Capacitive Touch Displays (LVDS) for Apalis modules

LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board. -20° to 70° C Temp, Range. Size: 248.5 x 166.1 x 15.0 mm.

  • Quantity
    >0
  • Unit Price
    $258.00
Intended Use: For Evaluation/Development
V1.0A
LM816 USB WiFi
PN: 21041000
Sample Production

LM816 USB WiFi for Apalis and Colibri Family

Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10° to 60° C Temp, Range. Size: 17 x 15 x 8 mm.

  • Quantity
    1-99
    >99
  • Unit Price
    $28.05
Intended Use: For Evaluation/Development
V1.1C
Carrier Board Accessory Kit
PN: 01131102
Sample Production

Accessory kit for Toradex carrier boards

Power Adapter: 12VDC 30W with international plugs. Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board.

  • Quantity
    >0
  • Unit Price
    $50.00
Intended Use: For Evaluation/Development
Have a Question?