Você escolheu

Acessórios



A Toradex oferece acessórios de prateleira que podem ser utilizados diretamente em nossos produtos finais. Para alguns acessórios nós disponibilizamos os arquivos de projeto (Esquema Elétrico, Altium, Projetos). Estes arquivos facilitam o projeto de acessórios específicos de acordo com as necessidades de sua aplicação.

Resultados: 1-15 de 20 produtos.
  Visualizar  
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • 1 Fastener bag contains 100 Fasteners
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable to connect it with a Carrier Board
  • No special drivers required
  • Operating temperature: -20° to +70° C
  • 40 pin and 10 pin FFC cable to connect it with a Carrier Board
  • Atmel touch driver
  • Operating temperature: -20° to +70° C
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -10° to 60° C
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -20° to 70° C
  • Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • No external power supply required
  • 802.11e-compatible bursting and I standards
  • BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
  • WEP, TKIP, AES, WPA and WPA2 hardware encryption schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board