配件

Toradex 提供现成的可直接使用于最终产品的配件。并且提供其中部分配件的设计文件,包括装配图、原理图和Altium的项目文件。这些设计文件能够轻松地用于设计定制化的应用配件需求。

结果 1-20 总共 31 个产品.
  看
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis T30
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX8
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additional threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis Evaluation Board and Ixora Carrier Board
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • MIPI CSI-2, MIPI DSI, LVDS and CAN-FD
  • Tactile Switches for Reset and Recovery
  • Compatible with Verdin iMX8M Mini, iMX8M Plus and AM62
  • 4 screws (M2x10mm) included with each heatsink for easy mounting to Verdin Carrier Boards
  • 1 Fastener bag contains 100 Fasteners
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable (250mm) to connect it with a Carrier Board
  • No special drivers required
  • 40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
  • Atmel touch driver
  • LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board
  • 34 Pins 0.5mm FFC Ribbon Cable (250mm) to connect with a Carrier Board
  • 24 Pins 0.12mm FFC Ribbon Cable (150mm) to connect with a Carrier Board
  • Plug and Play (Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • No external power supply required
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board
Have a Question?