検索ワード

絞り込み検索

アクセサリ

最終製品に直接ご使用いただける既製のアクセサリを提供します。 いくつかのアクセサリは、組立図、回路図、Altium プロジェクトファイル等の設計資料も提供可能です。 それらの設計資料を用いて、アプリケーション固有の要求に応えるカスタムアクセサリを容易に設計できます。

検索結果:19製品中1-15
  表示件数  
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis T30
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • x16 (x4 mode) PCI Express slot
  • Push button for entering Apalis T30 recovery mode
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
  • 1x Generic Header, 1x USB 2.0
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • Proven reliability in many vibration and shock tests
  • Colibri carrier boards provide mounting holes (except for Viola)
  • 1 Fastener bag contains 100 Fasteners
  • Resolution: 800x480px
  • 18-bit RGB + TCON
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable to connect it with a Carrier Board
  • No special drivers required
  • Operating temperature: -20° to +70° C
  • Resolution: 800x480px
  • 18-bit RGB + TCON
  • 40 pin and 10 pin FFC cable to connect it with a Carrier Board
  • Atmel touch driver
  • Operating temperature: -20° to +70° C
  • EDT 5.7" Display with 640x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -10° to 60° C
  • EDT 7" Display with 800x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -20° to 70° C
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps, 802.11b/g/h-compatible
  • 1x1 MIMO technology improves eective throughput and range over existing 802.11 b/g products
  • Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Compatible with Colibri T20, Colibri T30 and Colibri iMX6
  • Provides easy-to-use interface to connect a full HD monitor to the Colibri Module using HDMI interface
  • No external power supply required
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps, 802.11b/g/h-compatible
  • 1x1 SISO technology improves effective throughput and range over existing 802.11 b/g products
  • 802.11e-compatible bursting and I standards
  • BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
  • WEP, TKIP, AES, WPA and WPA2 hardware encryption schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Uses Analog Devices, ADV7280 video decoder
  • Analogue Camera Input : 4 multiplexed video input channels, supporting NTSC / PAL / SECAM composite video signals
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
  • Cables: USB, Ethernet, RS232, Jumper Wires
  • Adapters: DVI to VGA, HDMI to DVI, USB to RS232, USB Micro-A to A (USB Micro-AB receptacle to Type A), RS232 Header to D-Sub, Iris Power-adapter
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board