Sie wählten

Suche

Ergebnisse filtern

Accessoires

Toradex verkauft einsatzbereite Accessoires, welche direkt in Endprodukten verwendet werden können. Für einige der Accessoires stehen die Design Files, inklusive der Assembly Drawings, Schematics und Altium Projekte zur Verfügung. Diese Design Files ermöglichen eine einfache Herstellung von spezifischen und angepassten Accessoires für anwendungsspezifische Anforderungen.

Ergebnisse 1-15 von 19 Produkten
Ansicht    
  • Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis T30
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
  • Contains the TIM (Thermal Interface Material) and 4 screws
  • Easily mounted to the Apalis Carrier Boards by means of 4 screws
  • Additonal threaded holes available for attaching fan to the carrier board
  • x16 (x4 mode) PCI Express slot
  • Push button for entering Apalis T30 recovery mode
  • CSI and DSI interfaces on one connector
  • Push button for Apalis T30 reset
  • 1x Generic Header, 1x USB 2.0
  • 1x MIPI CSI-2, 1x MIPI DSI
  • 1x Tactile switch to enter Apalis iMX6 module recovery mode
  • 1x Tactile switch to reset Apalis iMX6 module
  • Proven reliability in many vibration and shock tests
  • Colibri carrier boards provide mounting holes (except for Viola)
  • 1 Fastener bag contains 100 Fasteners
  • Resolution: 800x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • 25mm FFC cable to connect it with a carrier board
  • No special drivers required
  • Resolution: 800 x 480
  • Touch Interface: I2C
  • EDT 5.7" Display with 640x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -10° to 60° C
  • EDT 7" Display with 800x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • Unified TFT Interface from EDT
  • 250mm FFC cable
  • -20° to 70° C
  • Fusion 10" Display with 1024x600px
  • Capacitive Multi-Touch
  • Interface Board for easy connection
  • Display signals over RGB-TTL
  • Drivers for Linux and WinCE
  • Compatible with Colibri T20, Colibri T30 and Colibri iMX6
  • Provides easy-to-use interface to connect a full HD monitor to the Colibri Module using HDMI interface
  • No external power supply required
  • Operates in 2.4 GHz frequency bands with data rate up-to 150 Mbps
  • 1×1 SISO technology improves effective throughput and range over existing 802.11 b/g products
  • 802.11e-compatible bursting and I standards
  • BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
  • WEP, TKIP, AES, WPA and WPA2 hardware encryption schemes
  • Can be setup as a ad-hoc network via peer to peer communications
  • Uses Analog Devices, ADV7280 video decoder
  • Analogue Camera Input : 4 multiplexed video input channels, supporting NTSC / PAL / SECAM composite video signals
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
  • Cables: USB, Ethernet, RS232, Jumper Wires
  • Adapters: DVI to VGA, HDMI to DVI, USB to RS232, USB Micro-A to A (USB Micro-AB receptacle to Type A), RS232 Header to D-Sub, Iris Power-adapter
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board