You've Selected

Narrow Results

Accessories

Toradex offers off-the-shelf accessories that can be directly used in end-products. For few of the accessories, the design files including assembly drawings, schematics and Altium projects are available. These design files enable easy design of customized accessories as per application-specific requirements.

Results: 1-15 of 21 products.
  View  
Apalis Heatsink Type 1
 

Heatsink for Apalis iMX6Q IT and Apalis iMX6D IT modules

Compatible with Apalis iMX6Q IT and Apalis iMX6D IT, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additional threaded holes available for attaching fan to the carrier board.

Apalis Heatsink Type 2
 

Heatsink for Apalis T30 module

Compatible with Apalis T30, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additional threaded holes available for attaching fan to the carrier board.

Apalis Heatsink Type 3
 

Heatsink for Apalis TK1, iMX6Q and iMX6D modules

Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additional threaded holes available for attaching fan to the carrier board.

Apalis Heatsink Type 4
 

Heatsink for Apalis iMX8QM modules

Compatible with Apalis iMX8QM, Easily mounted to the Apalis Carrier Boards by means of 4 screws, Additional threaded holes available for attaching fan to the carrier board.

Apalis T30 Mezzanine
 

Mezzanine board for Apalis T30 module

CSI and DSI interfaces on one connector, Push button for Apalis T30 reset.

Apalis iMX6 Mezzanine
 

Mezzanine board for Apalis iMX6 module

1x Tactile switch to enter Apalis iMX6 module recovery mode, 1x Tactile switch to reset Apalis iMX6 module.

Apalis TK1 Mezzanine
 

Mezzanine board for Apalis TK1 module

1x DSI and 3x MIPI CSI connectors, 1x Tactile switch to enter Apalis TK1 recovery mode, 1x Tactile switch to reset Apalis TK1 module.

Colibri Fasteners
 

Fasteners for Colibri modules

1 Fastener bag contains 100 Fasteners.

Resistive Touch Display 7
 

Resistive Touch Displays it for Apalis & Colibri modules

Touch: 4-Wire Resistive Touch, 40 pin FFC cable to connect it with a Carrier Board, No special drivers required, Operating temperature: -20° to +70° C, Range. Size: 164.9 (W) x 100.0 (H) x 13.0 (D) (max) mm.

Capacitive Touch Display 7
 

Capacitive Touch Displays it for Apalis & Colibri modules

40 pin and 10 pin FFC cable to connect it with a Carrier Board, Atmel touch driver, Operating temperature: -20° to +70° C, Range. Size: 173.1 (W) x 112.5 (H) x 13.0 (D) (max) mm.

Display EDT 5.7
 

5.7" TFT VGA with Touch Display for Apalis & Colibri modules

4-Wire Resistive Touch, Unified TFT Interface from EDT, 250mm FFC cable, -10° to 60° C, Range. Size: 124.7 (W) x 100 (H) x 11.7 (D) (MAX) mm.

Display EDT 7.0
 

7.0" TFT WVGA with Touch Display for Apalis & Colibri modules

4-Wire Resistive Touch, Unified TFT Interface from EDT, 250mm FFC cable, -20° to 70° C, Range. Size: 166 (W) x 105.44 (H) x 10.95 (D) (max) mm.

LM816 USB WiFi
 

LM816 USB WiFi for Apalis and Colibri Family

Plug and Play (Linux, macOS X, Windows XP – 10, Windows 10 IoT Core and Windows Compact Embedded 6/7 compatible), BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes, WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes, Can be setup as a ad-hoc network via peer to peer communications.

Colibri HDMI Adapter
 

HDMI Adapter for Colibri modules

No external power supply required.

Analogue Camera Adapter
 

Analogue Camera Adapter for Apalis & Colibri modules

Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync, No external power supply required, Compatible with Colibri Evaluation Board and Apalis Evaluation Board.